Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Hotpoint df53. Motor seal/pipe
Yeah, I wondered what the other one was.
Soon find out when you get it I guess, let us know eh ?
Dave.
Dave_Conway
ParticipantRe: Indesit WN 610 WR clamp band
Don’t hold me to it but I reckon the early Whirlpool one should fit, part number 4819 492 68515.
It’s a wire clamp with a longish spring so it should be easy enough to adapt.
Dave.
Dave_Conway
ParticipantRe: Teba SOMF60SS built in single oven
You’ll need to get the proper model number from the rating plate Ray.
That number is possibly from the customer reciept, which they nearly always get wrong for some reason, it’s not in the correct format.
Dave.
Dave_Conway
ParticipantRe: Possible Gas Leak On Fridge, Help Required
Anonymous wrote:Sorry for the treble post
Fixed 😉
It’s probably not your browser, the site may have been slow in reacting and you hit the “submit” button 3 times.
Dave.
Dave_Conway
ParticipantRe: Possible Gas Leak On Fridge, Help Required
It’s OK !
The pipes at the back are meant to get hot (they always will have done, you just didn’t/had no need to notice before) and the gurling noise is the top up gas, some of it will have been in liquid form. If the fridge is now down to temperature the engineer has diagnosed and repaired correctly.
Nothing to worry about 😀
Dave.
September 25, 2004 at 9:33 am in reply to: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack’d #116735Dave_Conway
ParticipantRe: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack
wilky wrote:Any suggestions on the easiest way to get at these in the machine to replace them?
Remove the back panel 😉
Make sure you pull the plug 1ST ❗
September 25, 2004 at 8:51 am in reply to: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack’d #116733Dave_Conway
ParticipantRe: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack
wilky wrote:Guys, My TDC62 has stopped drying – it just tumbles! – do you reckon it is the thermal cut-outs that need replaced, and if so, where did you get them?
Almost certainly it will be yes. the part number is 1701583, if you have a Nochex account (the credit card module has an error at the moment 😕 ) you can buy them from the shop here:
http://shop.ukwhitegoods.co.uk/c0009556 … mostat-kit
Dave.
Dave_Conway
ParticipantRe: Hotpoint df53. Motor seal/pipe
grooster, is this it ?
http://shop.ukwhitegoods.co.uk/32×1617- … tion-motor
Don’t buy it from there as that’s the retail price, the part number is there though 😉
Dave.
Dave_Conway
ParticipantRe: Mystery Post!
Yeah, I got the same topic reply. Incidently, what was it before it got deleted ?
Dave.
Dave_Conway
ParticipantPenguin45 wrote:It’s an ANNOUNCEMENT! in General Trade Forum.
kwatt wrote: 🙄
So it is, but spelt wrong.
Amusing Ancedotes & Other Tales
Hence when I did a search for “anecdote” earlier it didn’t find it. 🙄
LOL 😆
Dave.
Dave_Conway
ParticipantRe: Asko dishwasher parts
That should be enough.
I’ll place an enquiry for you with the Asko distributor.
Dave.
Dave_Conway
ParticipantRe: Sing it Frank!
Martin wrote:For lovers of Frank Sinatra……..
Thanks, but ………;)Dave_Conway
ParticipantRe: Whirlpool AWM 6140/3
Correct timer for that 12nc is 4812 282 19358
HTH
Dave.
Dave_Conway
ParticipantRe: blomberg fridge/freezer CFFN 266
Fiona Scott wrote:I am looking for the two white plastic cllips that keep the top door in the freezer compartment closed. They look a bit like white plastic hose clips. ➡
Is this the same model number as the previous poster ?
Dave.
Dave_Conway
ParticipantRe: servis m60130al wont spin!!
algygale wrote:Any ideas please i dont understand it?
Almost certainly a PCB problem that one.
algygale wrote:Where can i get the PCB tested is the next question?
http://www.qer.biz/NonUKTrade.htm
QER offer a test and repair service for modules.
algygale wrote:or where can i get a wiring diagram/decent manual so i know how these things work?
You won’t I’m afraid, that sort of information is not available to the public, or even the trade in this case as it’s a Servis.
Dave.
-
AuthorPosts
