Forum Replies Created
-
Posts
-
Re: Tower pressure cooker seal
Check the diameter of the Tower ones. Connect’s info is wrong quite often 😉
There’s quite a few variations. I can get one from them for you jim if they still have it 🙂
Dave.
Re: Blomberg 1501AAA Motor/Armature (Selni motor)
55X5059 is the right part number, about £100 trade is the best I can see 😯 😥
Re: haier dishwasher hinges
Bill wrote:We got our HAIER parts through GBDAR if that helps you
That sounds about right, they like dealing with quality appliances :rotl:
Re: CANDY CN146T MODULE [INFO REQD]
LightingElectrical wrote:Can anyone provide details of the wiring connections to this board.
On the way to your inbox 🙂
PCB (according to GIAS) is 41003804 😕
Dave.
Re: diplomat ahy44**
AHY44** will have two more numbers on the end (hence the asterisks), those are taken from the user manual and not the oven rating plate 😉
Probably a door seal or hinge issue though 🙂
Dave.
Re: HOTPIONT BSI620 error code required
Definitely not a correct model but check the WIDL codes in the error codes thread, that sounds closest 🙂
Dave.
Re: Ariston FV 37 GB oven door
The glass is probably just lipped under the handle edge holding it in place unless the handle is secured from the inner panel ? 🙂
Be careful, the outer glass won’t be cheap if it breaks ! 😯
Dave.
Re: Diplomat ADP 8224
Timmsie wrote:However the 8224 doesnt have a panel you can remove :?:.
Yep, it does 😉
Uninstallation required though (with the power off :zap:)
If you’re unsure, check the repairs@ link below for an engineer 🙂
Dave.
Re: whirlpool generation 2000 g2p dwi/1 wh
Search the forums for “NTC and Whirlpool” , that should help 🙂
Dave.
Re: Filters
Which one Andy ?
This is the external one (pattern):
http://www.ukwhitegoods.co.uk/modules.p … cts_id=596
If it’s another type, let me know the model 🙂
Dave.
