Dave_Conway

Forum Replies Created

Viewing 15 posts - 1,111 through 1,125 (of 12,426 total)
  • Author
    Posts
  • in reply to: Hoover new wave drum spider #185018
    Dave_Conway
    Participant

    Re: Hoover new wave drum spider

    Spider part number is 09171554 or the whole drum/spider – 09090622.

    Drill off job by the looks of it 😉

    Dave.

    in reply to: Masterpart web site #177688
    Dave_Conway
    Participant

    Re: Masterpart web site

    It’s not just the restocking, the UKW shop@ doesn’t shut at 5.30PM 😉

    😆

    in reply to: Bernstein #184967
    Dave_Conway
    Participant

    Re: Bernstein

    Or a Servis occasionally 😉

    Dave_Conway
    Participant

    Re: How to defrost Proline PC226A, user manual would be usef

    clyde wrote:might be worth you adding that link to the instruction manual sticky thing?

    Good plan 🙂

    Comet engineers/employees – please list all the Comet brand names you know of if you can (and if you read this) please :tup:

    Dave.

    in reply to: INTERGRATED WASHING MACHINES #184567
    Dave_Conway
    Participant

    Re: INTERGRATED WASHING MACHINES

    Thanks for the feedback handwash, it’s appreciated 😀

    Dave.

    in reply to: Masterpart web site #177686
    Dave_Conway
    Participant

    Re: Masterpart web site

    Is their site down for everyone else (since yesterday sometime) ?

    They’ve already lost over £100 worth of trade from me to the Brummy Bandits 🙁 :bang:

    Unless I CBA to transer it over tomorrow 😉

    Dave.

    in reply to: Ariston FB36(WH)GB – Everything works but the OVEN #184929
    Dave_Conway
    Participant

    Re: Ariston FB36(WH)GB – Everything works but the OVEN

    Oj-McSplodge wrote:Cheers kwatt…..

    And thanks to Lynchpin as well for there online help…

    It’s the same person (Lynchpin and kwatt) 😆

    in reply to: Creda Replacement Outer Oven Door Glass #184932
    Dave_Conway
    Participant

    Re: Creda Replacement Outer Oven Door Glass

    Replied to your email for the same R 🙂

    Dave.

    in reply to: KENWOOD D/W FAULT CODE #184886
    Dave_Conway
    Participant

    Re: KENWOOD D/W FAULT CODE

    If it’s a Haier made one (most are) then E4 does seem to be the flood protection 😉

    Dave.

    in reply to: Heater for Zanussi dishwasher model DE6854 #184829
    Dave_Conway
    Participant

    Re: Heater for Zanussi dishwasher model DE6854

    Is there an economy setting that has been selected, this turns the drying off on certain models ?

    The appliance would go in to error mode if the heater had failed and display a code normally.

    If the settings are all OK, I would suggest an engineer to be honest, electronically controlled appliance so it could be a number of things 😉

    Dave.

    in reply to: smeg DWI 710 E #184883
    Dave_Conway
    Participant

    Re: smeg DWI 710 E

    You could try resetting it (use forum search for “smeg and reset”), if that doesn’t work it’s engineer time to be honest, various component failures can cause errors on these electronically controlled models.

    The repairs@ link below should provide an engineer should the need arise 🙂

    Dave.

    in reply to: Hygena F/F Compressor #184876
    Dave_Conway
    Participant

    Re: Hygena F/F Compressor

    Penguin45 wrote:What is it really? £40-50?

    £37.05 ex VAT, guess where from ? :snigger:

    in reply to: Crusader CT51V – new element but wiring changed?????? #184791
    Dave_Conway
    Participant

    Re: Crusader CT51V – new element but wiring changed??????

    You should have recieved part number 1701897, if not it’s the wrong one 😉

    There are two heater types for this model which is why Clyde was asking for the serial number and part number 😀

    Dave.

    in reply to: W/pool ACM340 Cooker Hob Regulator #184638
    Dave_Conway
    Participant

    Re: W/pool ACM340 Cooker Hob Regulator

    laurenceuk wrote:Tried to open one and talked to a guy, mentioning a name you gave me – even faxed my details to them as requested but heard nothing. That was about six months ago.

    Email sent to the relevent person pointing them to this thread 😉

    He’s on holiday I believe for a week or so 🙂

    Dave.

    in reply to: Hygena F/F Compressor #184874
    Dave_Conway
    Participant

    Re: Hygena F/F Compressor

    HTP14AH 🙂

    Aspera BPE1111Y by the looks of it, check out the price Connect errrm Partmaster want for it :rotl:

    http://www.partmaster.co.uk/cgi-bin/pro … O27GWLU{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20

    Dave.

Viewing 15 posts - 1,111 through 1,125 (of 12,426 total)