Dave_Conway

Forum Replies Created

Viewing 15 posts - 1,126 through 1,140 (of 12,426 total)
  • Author
    Posts
  • in reply to: W/pool ACM340 Cooker Hob Regulator #184637
    Dave_Conway
    Participant

    Re: W/pool ACM340 Cooker Hob Regulator

    I’ve emailed you a piccy of it 😀

    Dave.

    Dave_Conway
    Participant

    Re: Split seal on Hotpoint Fridge freezer. Hotpoint Model RF

    Well, as the whole door is £72.00 ex VAT and carriage it probably isn’t worth replacing at that cost 😉

    Keep an eye on the temperatre but if it isn’t too bad I would ignore it to be honest 🙂

    Dave.

    in reply to: W/pool ACM340 Cooker Hob Regulator #184635
    Dave_Conway
    Participant

    Re: W/pool ACM340 Cooker Hob Regulator

    If it’s secured by two screws, Masterpart’s ER14101 should do nicely 🙂

    Dave.

    in reply to: Diamond H Wiring Reference #171028
    Dave_Conway
    Participant

    Re: Diamond H Wiring Reference

    33ER3HT and 43ER105B1

    Pilot = S2
    Line = P1
    Load A = 2
    Neutral = 4
    Load B = P2
    Link wire for Pilot wire fits between P1-S1 NOT P1-4 as additional wiring diagram suggests

    in reply to: DIPLOMAT DW ADP8242 #184837
    Dave_Conway
    Participant

    Re: DIPLOMAT DW ADP8242

    Here is the wording as per MFI’s tech info:

    The manufacturer has made a modification to the door lock assembly on this model which affects the way the door lock is fitted to the appliance.

    If the appliance was purchased before 23/04/2003 you will need to order the following parts:

    Door lock 697690139
    Door lock microswitch 814490321
    Inner door 692050468
    Control panel 763735661

    Personally I’d just order the control panel and see what it’s like on arrival 😉

    Dave.

    in reply to: necht dishwasher please help #184831
    Dave_Conway
    Participant

    Re: necht dishwasher please help

    It’s a Haier but no-one seems to have the fault codes for them.

    Previous posts would suggest it’s a flooded base though, probably caused by 3/4 in 1 tablets 😉

    Dave.

    in reply to: DIPLOMAT DW ADP8242 #184835
    Dave_Conway
    Participant

    Re: DIPLOMAT DW ADP8242

    There’s two types Mark, purchase date before and after April 2003.

    The earlier version requires a complete inner door modification 😯

    The late version and the most likely is 763737113 🙂

    Dave.

    in reply to: Heater for Zanussi dishwasher model DE6854 #184827
    Dave_Conway
    Participant

    Re: Heater for Zanussi dishwasher model DE6854

    Could you find the production number (PNC) please from the rating plate, it will begin 911…….

    There are several versions of this model 🙂

    Dave.

    in reply to: Hotpoint Fridge Freezer #184821
    Dave_Conway
    Participant

    Re: Hotpoint Fridge Freezer

    If the model is correct it could be either the baffle in the fridge or the control PCB, there’s little else that can be replaced on these models (sensors all foamed in and not removeable :()

    Power off when checking please or try the repairs@ link below for an engineer 🙂

    Dave.

    in reply to: ariston awd 12 advantage #184815
    Dave_Conway
    Participant

    Re: ariston awd 12 advantage

    If the water smells it can only be back-syphoning from the waste to be honest 😉

    To narrow it down, turn the hot and cold taps off overnight and see if it still fills 🙂

    Dave.

    in reply to: WHITE WESTINGHOUSE EK95581AC #184820
    Dave_Conway
    Participant

    Re: WHITE WESTINGHOUSE EK95581AC

    You did post it yesterday and I replied here:

    http://www.ukwhitegoods.co.uk/modules.p … ght=#94394

    😉

    in reply to: Hoover AM110 #184773
    Dave_Conway
    Participant

    Re: Hoover AM110

    Possibly the thermistor is at fault, it needs checking for resistance change during temperature rise and fall 🙂

    Check the repairs@ link below if you are unable to carry out this type of test (with the power off of course) 😉

    Dave.

    in reply to: Indesit DG6145 controler won’t move on #184802
    Dave_Conway
    Participant

    Re: Indesit DG6145 controler won’t move on

    The timer is motor driven yes, if that is the problem it would require a complete timer unit, not too bad at about £40 with VAT etc though 🙂

    Power off if checking further please :zap: or check the repairs@ link below for an engineer to do conclusive checks for you 😀

    Dave.

    in reply to: Homark 02-800270 dishwasher motor #184812
    Dave_Conway
    Participant

    Re: Homark 02-800270 dishwasher motor

    It’s basically a Servis but the serial number is required, they’ve changed the circ pump 3 times during poduction :rolls:

    in reply to: PART NO FOR INDESIT RANGE COOKER ? #184810
    Dave_Conway
    Participant

    Re: PART NO FOR INDESIT RANGE COOKER ?

    Outer glass is part number C00094971, about £42 list.

    Available from any Hotpoint distributor (ie anyone :lol:)

    Dave.

Viewing 15 posts - 1,126 through 1,140 (of 12,426 total)