Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Zanussi/Candy lost post
Ally, you’re trying to confuse me 😉
The CIC320LEUK is a Candy fridge/freezer and the ZB350W is the Zanussi cooker hood.
Anyway, the Candy picture shows two small trays at the top which are 91616631 descrides as medium containers, below that is part number 91616888 which is the support for the two medium one’s mentioned. Further down is the bottle shelves described as such:91619080 Lower bottles shelf before serial number 9926 91600681 Lower bottles shelf after serial number 9926.
The Zanussi runners, I guess you mean the two curved plastic parts which are part numbers 50233123004 for the right hand one and 50233122006 for the left.
Hope that makes some sense anyway 😀
Dave.
Dave_Conway
ParticipantRe: Philco DW1906 basket wheels
Yep, that’s the one.
If anyone’s got any of these hanging about or knows of something similar ?
Dave.
Dave_Conway
ParticipantRe: Proline EF7000W/1 Fan Oven Element
laurenceuk wrote:PS I expect it was taken off because of a comment I made. I must remember to be circumspect about such things. Sorry webmasters. 😕
Not at all Laurence, the post was lost over the weekend due to a database problem.
Apart from the odd duplicated post, not a single one as far as I am aware has ever been removed, which says an awful lot for the honesty, integrity and general courteous manner of the members here 😀
Dave.
Dave_Conway
ParticipantRe: Hotpoint RL64 Iced Diamond Larder Fridge – not cold
There’s two ways, either just post it as a reply to this, or on the left use the “database” funcion and search using the first two letters of your postcode.
Dave.
Dave_Conway
ParticipantRe: Electrolux built-in Refrigerator problems
It’s an integrated under counter larder fridge, so, almost certainly compressor failure. Even if it was a leak, the liklehood of being able to find and rectify the leak is almost zero, so the problem will recur.
Best bet, buy a new fridge.
Dave.
Dave_Conway
ParticipantRe: Servis 600 washing machine
The spin speed information you want is already there, it’s a 600rpm machine, basically bottom of the range and the cheapest model available.
Current market value, about £25, that’s if it’s in good working order. Sorry, but that’s about it as the machine would only have cost about £150 new and green is now an old colour choice.
Dave.
Dave_Conway
ParticipantRe: Electrlox built-in fridge not getting cold
What’s the model number etc please ? Everything you can find on the rating plate would be usefull.
Dave.
Dave_Conway
ParticipantRe: indesit evolution we16 error code: ‘ – con’
Minty wrote:i’ll just kee an eye on it i suppose
Probably wise 😉
Unless -con has something to do with the fabric softener (-con being conditioner )
It would be interesting to know the outcome if any, if you resolve it or find out, maybe you would post back.
Dave.
Dave_Conway
ParticipantRe: indesit evolution we16 error code: ‘ – con’
That’s an odd one. I don’t think that actually is a fault code, they would normally be F01, F02 etc etc.
Is the machine actually doing anything ?
Dave.
Dave_Conway
ParticipantRe: Hotpoint RL64 Iced Diamond Larder Fridge – not cold
Or, post your postcode here, most of the members here are engineers 😉
One of them will be able to help.
Dave.
Dave_Conway
ParticipantRe: Hotpoint RL64 Iced Diamond Larder Fridge – not cold
It probably is the thermostat, the fact that you ask “Could this be the case and is it possible to repair DIY?” would suggest that you would be better off (and safer) to call and engineer.
The thermostat itself is around £20, so you shouldn’t be faced with a massive repair bill .
Dave.
Dave_Conway
ParticipantRe: Fridgemaster MTRL130
BobHope wrote:it might have the wrong thermostat fitted, is it r600a or r134a refrigerant differant thermostats are fitted
Yeah there is isn’t there, I forgot about that, there are a few with R134a units fitted, oddly enough though, untill the bulletin was released we were fitting the same stat to both and have not had any problems 😕
Dave.
Dave_Conway
ParticipantRe: Fridgemaster MTRL130
No, this is not normal and is a very common problem.
If you just replace the thermostat with a standard VT9 it will solve it, most of the time anyway 😉
Dave.
Dave_Conway
ParticipantRe: Zanussi DWS909W
Hi Bob,
Check Alex’s reply to a previous similar query here:
http://www.ukwhitegoods.co.uk/postt625.html
And there’s quite a bit on the same thing here:
http://www.ukwhitegoods.co.uk/postt326.html
HTH
Dave.
Dave_Conway
ParticipantRe: Diplomat 8242 problem
From the description of the light sequence, it means the dishwasher is unable to empty the water.
Check for blockages etc in the waste system the outlet hose connects to, apart from that, if that all seems ok, you will need an engineer most likely.
Dave.
-
AuthorPosts
