Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Hotpoint Fridge Freezer FFa90
The defrost drain hole/tube is blocked 😉
Possibly a defrost control problem but it may be a one off, try a total defrost and see how it goes 😀
Dave.
Dave_Conway
ParticipantRe: seal on freezer part of zanussi fridge/freezer..
The seal is shown as a seperate part but please check that it can be replaced as often they are shown to be available but in practice are moulded as above.
The seal is £44.22 and the whole door £106.38 😯
An email to spares@ukwhitegoods.co.uk please if either are required 😀
Dave.
Dave_Conway
ParticipantRe: What was…
Hollies – I’m Alive 😕
Lovely 😆
Dave_Conway
ParticipantRe: whirlpool arc5530 overfreezing
Door seal or insulation issue perhaps ?
Dave.
Dave_Conway
ParticipantRe: Hotpoint Mistral fridge/freezer not cooling
Thanks,
Have you read through the Mistral post (sticky) at the top of this forum ? 🙂
http://www.ukwhitegoods.co.uk/modules.p … pic&t=4509It may be engineer time I think on this one to be honest, check the repairs@ link below 😉
Dave.
Dave_Conway
ParticipantRe: Cooling problem with a Hotpoint Mistral 8596P
rss wrote:Could it be the main board that is playing up ?
Possibly 😕
Engineer time I think on this one, check the repairs@ link below 🙂
Dave.
Dave_Conway
Participanttsherman tanky wrote:could the problem be the pump or anything else associated with it
Yep, more than likely. Power off when checking please :zap:
If you need pro help, check the repairs@ link below 🙂
Dave.
Dave_Conway
ParticipantRe: Belling XOU177
082620289 is the part number.
Please be seated (preferably on the loo) when checking the price 😯 😆
Dave.
Dave_Conway
ParticipantRe: hotpoint mistral plus 8596c
Have a read through the huge Mistral post (sticky at the top of this forum) and check the references to the baffle in the fridge 😉
It may be that. Power off of course when checking
Dave.
August 5, 2006 at 2:50 pm in reply to: Electrolux EOB 976 oven element not working…which spare? #184160Dave_Conway
ParticipantRe: Electrolux EOB 976 oven element not working…which spar
ELE14106 is the correct part:
http://shop.ukwhitegoods.co.uk/product_ … cts_id=543
It’s just that our supplies were poorly manufactured, now re-sourced from elsewhere and due in on Monday 😀
Dave.
Dave_Conway
ParticipantRe: Gorenje web site
It’s https://products.gorenje.si/service/prijava.htm but you need a user/pass etc.
It also appears to be down at the moment 🙁
Dave.
Dave_Conway
ParticipantRe: dishwasher service manual ? – hotpoint FDW60
supermike wrote:Where can I get a service manual for a hotpoint FDW60.
You won’t I’m afraid, even we can’t get them 🙁
Fault code 3+5 means exactly as you’ve described, the main pump will not run, that’s it (they are only a guidline).
Power off if checking further please or check the repairs@ link below for an engineer 🙂
Dave.
Dave_Conway
ParticipantRe: Hoover AE130 soap dispenser / spray arm
The spray nozzle inside the dispenser is controlled mechanically by the rotation of the main timer (cam).
Check there, with the power off of course :zap:
If you need pro help, check the repairs@ link below 🙂
Dave.
Dave_Conway
ParticipantRe: Hoover HC110M stopped working – well almost
Double check the door lock, if that’s 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} OK then I would suspect the main control PCB or possibly the selector switch.
I shouldn’t have te mention to power off but for future readers ….. 😉
Dave.
Dave_Conway
ParticipantRe: Electrolux fan Oven EOB5630X won’t heat up
The fan element has failed more than likely, it’s this one:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=543
Power off when checking please or check the repairs@ link below if you’re not confident in carrying out the repair yourself 🙂
Dave.
-
AuthorPosts
