Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: SCANDINOVA
Comet job but Masterpart can normally source most parts as a special order 😉
Dave.
Dave_Conway
ParticipantRe: 3114073004
Lux are showing a ship date of 25/08 if it helps Barry, no-one else has it either by the looks 🙁
Dave.
Dave_Conway
ParticipantRe: Cooling problem with a Hotpoint Mistral 8596P
Have a read through the huge Mistral post and find posts relating to the baffle in the fridge, it could be that staying shut 😉
Dave.
Dave_Conway
ParticipantRe: Samsung SR-L3216B/XEU Fridge/freezer
3mb of stuff on the way to your inbox 🙂
It’s for the SRL3616 but basically the same, Samsung don’t recognise the SRL32?? models on their site for some reason 😕
Dave.August 4, 2006 at 10:16 pm in reply to: Indesit WD12 (washer dryer) New pressure switch for free. #182098Dave_Conway
ParticipantRe: Indesit WD12 (washer dryer)
Moved here to keep things tidy 😉
Engineer time really isn’t it ? 😀
You may have a poor connection somewhere, intermittent pump/fill valve, PCB, Indesit fault codes are notoriously unreliable at times I’m afraid.
Dave.
August 4, 2006 at 10:14 pm in reply to: Indesit WD12 (washer dryer) New pressure switch for free. #182097Dave_Conway
ParticipantRe: Indesit WD12 (washer dryer)
n6600 wrote:Hi,
I have fitted a new pressure switch but it still flashes 10 times and stop.
1.I have clear the pump/filter (front bottom R/H side)
2. I have checked the hose that connect to the pressure switch.
3. clear the condenser
4.Check the hose (hot and cold water)I put some water in the drum and it will drain and then stop and gimme 10 flashes.
Please help
Thanks
Dave_Conway
ParticipantRe: Hotpoint Mistral fridge/freezer not cooling
Which model do you have Carl ?
Dave.
Dave_Conway
ParticipantRe: Cooling problem with a Hotpoint Mistral 8596P
Leave it overnight, it should be fine 🙂
The fan only starts running once the evaporator in the freezer reaches a certain temperature 😉
If not, let us know.
Dave.
Dave_Conway
ParticipantRe: hoover hnc170 jockey pulleys
The info is straight from the GIAS technical website Bob 😉
:kermit:
Dave.
Dave_Conway
ParticipantRe: zanussi frost free fridge freezer alarm problem
Model number please… 🙂
Dave_Conway
ParticipantRe: Hotpoint WF250
In the know error codes page 4 near the bottom:
http://www.ukwhitegoods.co.uk/modules.p … c&start=45
Dave 🙂
Dave_Conway
ParticipantRe: Electra 37523 does not start
Classic capacitor fault, these related threads will help:
http://www.ukwhitegoods.co.uk/modules.p … ic&t=15632
http://www.ukwhitegoods.co.uk/modules.p … ic&t=15278
🙂
Dave.
Dave_Conway
ParticipantRe: Engineer being alone in a house with a minor?
It’s the black handprints everywhere that annoy me

So no, I won’t enter a house with a miner in it 😆
Dave.
Dave_Conway
ParticipantRe: AWM 8129
There is no kit that I can see, the bearings are:
6204ZZ and 6206ZZ and the seal is part number 481253058099 (about £15).
Dave.
Dave_Conway
ParticipantRe: hotpoint wd420 washer drier flashing lights!
F05 then, pressure system related.
If you use the search here:
http://www.ukwhitegoods.co.uk/modules.p … ile=search
And search for F05 – pick out the Indesit and Ariston one’s, they are all the same controls and the error codes are the same 😉
Dave.
-
AuthorPosts
