Forum Replies Created
-
Posts
-
Re: Hoover AS110
It’s probably the correct amount of water, this model has a recirculating pump, a bit like a Zanussi jetsystem 😉
Dave.
Re: hotpoint fdw60g
The pump unit only is C00054979 at £25.27 list, it’s called a “pump cover” for some reason 😕
The “big nut” is part number C00075111 (part of the lower spray arm support) I think 🙂
Dave.
Re: Servis T600i
The Belling part number is 082613713 which is certainly cheaper 🙂
I think the picture on Connect’s site is wrong as that is what I was also looking at, the diagram on the Glen Dimplex disk shows a double 😀
Dave.
Re: Scholtes MLS 60 Door interlock
I have the photos you sent, I’ve put them on imageshack and linked to them here 🙂
Click on them to enlarge 😉
Dave.Re: SMEG ELEMENT REQUIRED
Dave_Conway wrote:PM me your details please
You already have I see :snigger:
Re: SMEG ELEMENT REQUIRED
It may be too late for overnight now but it will be Thursday latest (I’ll try for tomorrow though)
PM me your details please :tright:
Dave.
Re: Tecnik washer TKL9260 – Belt
That one’s a Bosch Nick:
http://www.bshappliancecare.com/Bosch/boschspares.html
No online info though, phone only 🙁
Dave.
Re: Servis Fridge Freezer M7545
Sowton eh 😀
It turns out that the MFI model you saw is made by Servis for them and it uses exactly the same part numbers as the ones for your model 😆
You need 4 of 398012600 door drag guides and 4 of 354005400 door drag supports.
From MFI they are £3.75 ex VAT each which seems a bit pricey, I’ll enquire as to the prices from elsewhere and let you know although they will take longer to arrive than from MFI.
Dave.
Re: Candy CN136 Washing machine bearings – 31000753044322215
Bearing seal part number 92445600
The inner bearing is 92440171 and the rear 92440197 (6204ZZ). I can’t find the size for the inner but my guess would be a 6205ZZ 😉
Candy prices are about a tenner each for the bearings so you could get a 6206ZZ just in case as well for less than that 😉
Dave.
Re: Zanussie FL884 914780082 serial 32200492
The special fitting genuine one now is also supplied with a standard thread so you have to drill it anyway, go with Chris’ advice and put a normal 16uf in there 😉
Dave.
Re: Manual needed for hotpoint WMA50 & TC71
http://www.ukwhitegoods.co.uk/modules.p … pic&t=2087
😉
Dave.
