Forum Replies Created
-
AuthorPosts
-
dealdd
ParticipantRe: miele washing machine w562 prestige plus 6
has any one got any paper work on the machines??
dealdd
ParticipantRe: hotpoint wma52s
have updated e-mail address
dealdd
ParticipantRe: miele washing machine w562 prestige plus 6
it is going to the position three straight away, so that seems ok. do you know how to extend the times??
dealdd
ParticipantRe: beko fridge freezer american style ap930x
turned out to be the circ fan in freezer and what a bugger it is to get too all plastic clips and screw heads that break. very cheep
dealdd
ParticipantRe: beko fridge freezer american style ap930x
cheers for that will arrange call to go back now and give self test a go. have you experianced one with the fridge getting too cold. it seems to be blowing colod air out the suction vent behind the salad bins not the top vent ???
dealdd
ParticipantRe: beko fridge freezer american style ap930x
admin@dealdiscountdomestic.co.uk
the fault is the fridge gets to cold and also the door on the ice dispenser does not opendealdd
ParticipantRe: hotpoint dishwasher bfi650
i have looked at those but the machine pumps out fine and fills fine do you know of any other reason this error would flash
dealdd
ParticipantRe: hotpoint dishwasher bfi650
sorry bfi620
dealdd
Participantdealdd
ParticipantRe: whirlpool tumble dryer 3xler5435hq0
yeh just read it back to my self werent very helpfull was i . lol. the fault is that it sometimes only gets warm and takes ages to dry. i have done all the usual things like cleaning fluff out and made no difference.
dealdd
ParticipantRe: admiral fridge frezzer
been back to this with a new board fitted it ok but it will not program, i refitted old board and i can program that fine. can you help as what board you have fitted in these models before
dealdd
ParticipantRe: hoover washing machine oph714d/1-80
cheers phil went back run test and run nmachine for a while sure enough element low insulation
dealdd
ParticipantRe: diplomat d/w adp8322
ok cheers lads i will fit a thermistor an see how it goes. if anyone comes up with any ideas in mean time please let me know
dealdd
ParticipantRe: diplomat d/w adp8322
do you know what ntc should measure?? i had one kicking around on van but not sure if it was faulty as when i fitted it fault was still there
dealdd
ParticipantRe: servis washer dryer
ok thanks again i think i will do the sensible thing and run as i have had nothing but a nightmare with these machine my self
-
AuthorPosts
