DIYer

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • September 3, 2023 at 6:40 pm in reply to: Bosch Dishwasher SPV40C10GB/32 FD: 9511 #487955
    DIYer
    Participant

    Thanks. The drain pump use to run even when the machine was off. I fixed that several times but I think the machine has probably given up after 7 years if this is a new error.

    September 3, 2023 at 4:00 pm in reply to: Bosch Dishwasher SPV40C10GB/32 FD: 9511 #487953
    DIYer
    Participant

    It is flashing quite rapidly and intermittently beeping

    February 21, 2016 at 10:24 am in reply to: BOSCH Dishwasher SRV43M03GB/29 #435589
    DIYer
    Participant

    Re: BOSCH Dishwasher SRV43M03GB/29

    I have never found local traders cheaper than the brand engineers. Recently I had a shower installed £75 from triton, at least double from local traders

    April 18, 2015 at 11:05 am in reply to: siemens HB131510B #426568
    DIYer
    Participant

    Re: siemens HB131510B

    do you mean what is underneath the silver/black control? how can i test if it is the control switch?

    April 17, 2015 at 3:04 pm in reply to: siemens HB131510B #426566
    DIYer
    Participant

    Re: siemens HB131510B

    do each of the hotplates have individual fuses – since my front right hot plate has stopped working and I do not know how to try and solve the problem?

    April 17, 2015 at 1:28 pm in reply to: siemens HB131510B #426564
    DIYer
    Participant

    Re: siemens HB131510B

    Hi another question – I thought the ceran hob was part of the oven but apparently not. How do i find the E-NR number for the hob please?

    April 17, 2015 at 12:27 pm in reply to: siemens HB131510B #426563
    DIYer
    Participant

    Re: siemens HB131510B

    Thanks found it – it was 0232. Pretty good site breaking down each part as it does!

    April 16, 2015 at 10:34 pm in reply to: siemens HB131510B #426561
    DIYer
    Participant

    Re: siemens HB131510B

    Thanks Dave
    any idea what the part is called?

    April 6, 2015 at 9:37 pm in reply to: Siemens WasherDryer WDI 1440 #425850
    DIYer
    Participant

    Re: Siemens WasherDryer WDI 1440

    how do i rectify this?

    April 5, 2015 at 2:03 pm in reply to: Siemens WasherDryer WDI 1440 #425848
    DIYer
    Participant

    Re: Siemens WasherDryer WDI 1440

    I put my washer machine on a cold wash and it is now coming up with code E01. I have checked for blockages and cannot find anything. Also I tried reset the machine by holding down the start button but nothing seems to work and it is continuously draining.

    March 30, 2015 at 11:05 am in reply to: Siemens WasherDryer WDI 1440 #425847
    DIYer
    Participant

    Re: Siemens WasherDryer WDI 1440

    found it!

    March 30, 2015 at 10:48 am in reply to: Siemens WasherDryer WDI 1440 #425846
    DIYer
    Participant

    Re: Siemens WasherDryer WDI 1440

    can’t see where the seal clamp ring is. the rubber seal is very tightly fitted to the machine

    March 30, 2015 at 1:30 am in reply to: Siemens WasherDryer WDI 1440 #425844
    DIYer
    Participant

    Re: Siemens WasherDryer WDI 1440

    do i need to remove the front panel?

    March 25, 2015 at 6:47 pm in reply to: Bosch SRV43M03GB/29 drain pump continuously running #425813
    DIYer
    Participant

    Re: Bosch SRV43M03GB/29 drain pump continuously running

    thank you!

    March 25, 2015 at 4:29 pm in reply to: Bosch SRV43M03GB/29 drain pump continuously running #425811
    DIYer
    Participant

    Re: Bosch SRV43M03GB/29 drain pump continuously running

    are the screws at the front of the left panel a special type – since none of my screwdrivers fit it?

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)