[don]

Re: Candy Washing Machine

Killer13 wrote:What exact ones do i need . I emailed the shop but did not get a reply and the link takes me to a page with various diffrent brushes.

Apologies for the shop not getting back to you but we have been away on our annual conference for the last couple of days. I know Dave has over a hundred emails to reply to.

In the meantime can you post up the 31 number from the machine label as there is more than one version of your appliance. I will then be able to point you in the right direction for the correct carbons.

Don

[don]

Re: WTA 2017 conference

Hope you feel better soon Mark. Look forward to seeing you next year.

Don

[don]

Re: New Moderator

Welcome to the team Dave it’s good to have you on board 😀

If you need any help just give one of us a shout.

Don

[don]

Re: TVF 760 tumble dryer time countdown getting stuck

Hi

Your dryer is one of the models due for modification if it has been done that’s okay, I’m sure one the guys will be able to help.

If not, the new advice is do not use the appliance until the work on it has been carried out. One of the many articles on this new advice here

Don

[don]

Re: Replacement for IGNIS Integrated Dishwasher

Hi

If the decor door size does not fit exactly decor door spacers come with most machines in the colour of the control panel ordered. If more are needed for whatever reason these can be ordered as optional extras.

Yes you could take it all out and cut through the plinth and put a freestanding 60cm dishwasher in.

HTH 🙂

[don]

Re: One for the oldies 37275

Got a Flatley airer circa late 50’s coming in today. The old dear of 90 will not even entertain the thought of a tumble dryer. This must be worse than a Hotpoint tumble dryer if one piece of clothing falls in it’s going to go up in flames.

For you youngsters who don’t know what one of these is I have attached a couple of photos. The image with the hose and bucket is one we repaired here about seven or eight years ago!!

Don

[don]

Re: In search of the fourth cord

I’m watching as well :popcorn: :snig:

Don

[don]

Re: Replacement for IGNIS Integrated Dishwasher

Hi

There is not a lot of choice these days in semi integrated dishwashers.

Hotpoint LSB5B019 comes in either white, black or stainless steel fascia. Bosch SMI50C15GB or the SMI65P15GB or Neff model S41E50S1GB again in white, black or stainless or the S41M63N1GB. These aside there is Miele but not a lot else.

The other choice would be to take your current decor door and see if you can get a full length one which matches the closest to the rest of the doors. That way you could have a fully integrated model of which there is a much larger selection.

HTH 🙂

Don

[don]

Re: Miele Go Sealed!

Hi K

I have just checked and even from the attached entry level WDA111 it does not have a sealed tub.

I also checked one from each set of the current range straight off the Miele site. Model numbers WDD030, WDB030, WKB120, WMB120, WTF130 and the WTZH130 and not a sealed tub in sight.

Unless this is what is going to be happening in the future production or someone is just looking for a reaction!!

Don

[don]

Re: Dryer on washerdyer

Hi Wendy

Can you post up the make and model number please. Without this you will not get any responses.

Don 🙂

[don]

Re: Hotpoint Mistrel Plus

Hi

Model number for starters would be good. 😉

Don

[don]

Re: Whirlpool AKG 668/01 IX oven user manual

Hi

I doubt you will find one, I tried 5 years ago for another poster on here but to no avail. You could try phoning Whirlpool service on 853566815060 to see if they can help.

Don

[don]

Re: questions- answers that make you want to slap people lol

“Are you sure that’s the right one”?

Nope it’s the wrong one. I just want you to waste your time and fuel so you have to come back.

Don

[don]

Re: Service manual for Zanussi zwd14270w1

Hi Jack00

I believe I have misled you for which I apologise. In all honesty I looked at your user name and believed you to be trade member Jacko, what I should have done was to look at your profile to check which was my mistake.

Sadly we are unable to issue wiring diagrams or service manuals for appliances to the public. Our own forum rules here and in particular rule 8 applies in this instance.

Again please accept my apologies for this error on my part. The guys on here will help you as far as they can however they cannot give blow by blow accounts as no one knows each individual’s level of competency.

Regards

Don

[don]

Re: Service manual for Zanussi zwd14270w1

Hi

The PNC or Prod no. is on the same label as the model and serial number. Either on the inside of the door frame or where the door shuts against the cabinet.

Your machine has the Prod or PNC number of 914604029 I just need the two digits after that to make sure you get the correct info.

Don

[Author]

Posts