Forum Replies Created
-
Posts
-
Re: BEKO product code SN 140220 – changing door direction
As we don’t know your model it’s hard to say. Usually the handle is fixed by two screws which have little covers over them on the handle, just pop these off with a thin flat blade to reveal the screws.
DonRe: BEKO product code SN 140220 – changing door direction
Hi
Your IP address suggests you are posting from Belguim 🙂
Your model is not listed on
http://be.beko.com/ perhaps it’s an older model you have bought or it’s not the right number as Google does not reference it either.
To answer your questions do not remove the white plastic tray. the heat from black motor will evaporate the water you do not need to do anything to this.
As I cannot find any instructions for your appliance have a look at this link for an English model http://downloads.beko.co.uk/bekoupload/ … PW_APS.pdf page 10 and 11 are the pages you need. The principle is the same for whichever country you are in.
HTH 😀
DonRe: Maytag GC2224GEKB American Fridge Freezer
Moved you down to Trade tech enquiries jaz.
Hope you and yours are both well 🙂
DonRe: Reconditioned appliances
Indeed Gillmans is the bricks and mortar retail side of the business.
DAD is run mainly by Robert Gillman while DAD is by Adrian Gillman. I think Adrians son has also joined the business as well.
DonRe: Reconditioned appliances
I can understand them perhaps selling a few new appliances on Ebay. I can’t find any recons though, Can you post up a link as an example please codlets?
Don
.Re: Dishwasher quandary
Bosch SMS40C32GB is the entry level machine. You should be able to pick one up around the £250 mark.
DonRe: fridge bulb
Hi
Your instruction manual usually tells you the type of lamp which is fitted. The most common one which is fitted to probably 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of all refrigeration is this one available from our shop amongst others.
DonRe: Dishwasher quandary
Hi
For an entry level machine the Beko DFC04210 take some beating. Entry level machine, no known issues and spares are readily available at a good price.
DonRe: Zanussi ZWH 6120P
I wouldn’t have thought that was the issue. I still think the problem lies elsewhere. As for a new drum? It’s just not worth it at £150 odd pound on a machine that retailed at £249 IIRC.
It’s time either to call in an engineer or look for a new machine.
DonRe: Integrated Washing Machine 59cm or less wide
Hi
There is nothing at 590 mm wide from any of the mainstream manufacturers. So you are going to need to replace it on a like for like for like basis. Prima PRLD350 is the only one which will fit.
DonRe: Zanussi ZWH 6120P
Could be a foreign object in the pump, is there a filter bottom front right corner you can check?
DonRe: Zanussi ZWH 6120P
Hi
Check the filter if it has one, some of the bottom end Zanussi’s don’t have one behind the front cover. Have come across coins etc trapped against the pump impeller which can get noisy when the machine spins.Bearings may be grumbling, Easiest way is to remove the belt then spin the drum by hand, Also check for any excessive drum movement front to back.
Without the full PNC or prod number starting 914……/.. it is hard to say which machine you have but picking one out you cannot replace the bearings as you have the dreaded sealed tub which is about £150 .
HTHDon
