Forum Replies Created
-
Posts
-
Re: Which Integrated Fridge Should I Buy??????
Hi Tony
For £300 I would go Gorenje everytime, with their 5 year parts and labour warranty you cannot go wrong.
Don
Re: Replacing Diplomat APM6855-1 integrated and in a muddle!
Hi
Can you recheck the height of the fridge freezer please as they are normally 177cm tall.
50:50 split is the most popular so sourcing stock should not be a problem. Any good local independent should be able to supply, install and dispose of the old appliance.
You could try the Retra listings to see if there is a recognised dealer nearby.
Comet as we knew them disappeared a year ago 😉
HTH 🙂Don
Re: Hoover HNC5174a
Sorry Franz
I’ll have a look in the morning for you unless anyone else jumps in sooner 😉
DonRe: Gorenje oven element
Hi Jim
According to Connect it’s 793688 genuine or pattern ELE3955.
In the UKW shop it’s this one, and there’s a cheaper pattern one as well.
Don
Re: Britannia Range SI-M10T6-SS Small oven hinges.
boselecta wrote:No other option with most Britannia parts but to get them direct I’m afraid. 0871 8718680
Qualtex are now stocking some Britannia spares, not sure what or how much though but could be worth a look.
DonRe: new oven, loud fan (bertazzoni F6M9PX)
Hi
Your’e IP address suggests you are posting from Canada which explains why I am not familiar with the brand Bertazzoni 😉 Googling the model no. I see it’s a single built in oven.
If this is a new appliance and covered by a manufacturers guarantee you need to get them out to investigate the problem. Having a “dig” yourself will render the guarantee void so not a good idea.First things first have the installation checked to make sure everything is as it should be. An uneven oven can cause all sorts of noise issues.
HTH 🙂
DonRe: bearing kit bosch 181927
Hi Keith
Taken from BSH spares site.
63062ZC3,D72,d30; 63052ZC3,D62,d25
Simmerring D1=72,5mm; D2=33,5mm;
I take it these would be 6306 and a 6305 bearings.
DonRe: You’ve Been Moderated!
You can ban them fine I have no problem with that. What I have a problem with is a few months time he / them will reappear in another guise and away we go again.
Is it not better to keep them close by restricting functionality as we have done and having them moderated? I would rather know where they are, that way we have control and not them.
If we go down the route of a total ban I would like K to round off the thread by explaining our actions and why so we remain transparent to the members. That way Ade or whoever have no comeback on the site or it’s members.
Don
Re: Miele dishwasher drain pump
Genuine part number if you need it is 6696272. Definitely not cheap.
Don
Re: Avatars
I must say Kens new avatar is a good likeness very smart indeed 😀
Do you always wear a jacket to work or was that a radio day ❓
DonRe: new gorenje d71112 vented tumble dryer wanted
Hi Jon
I doubt you will, that model is now obsolete and there is no replacement model either.
Don
