[don]

Sadly no longer available, part number for it was 10076681S. I would measure the old one and see if you can get a plastic tub to replace it with.

Don [h=1][/h]

[don]

That model is about twenty years old. Goes back to when appliances were built to last.

Don

[don]

You have a 70 : 30 split fridge freezer with sliding door hinge system.

Don

[don]

Thanks Murv, I don’t see Beko washer dryers and those instructions are not the best. At least the OP can sort it now.

Don

[don]

I agree the instructions are not the best around and page 45 on drying does not make much sense.

I would select the drying button (second one from right under the display). My guess is each time it is pressed the drying level or timed prog will change all you would do then is press start.

HTH

Don

[don]

Tim Cumper wrote:
I am presuming it’s best to exchange any transaction information and details – away from the thread.
Tim

Most definitely Tim, this is a public forum so anyone can view this thread.

Don

[don]

Under normal circumstances I would have said phone the manufacturers you may have been interested in but as most our now only operating service related issues. I have some tech enquiries outstanding from December!!

Back to your problem, I have not come across this either. You could try Bosch on 0344 892 8979 remember though only skeleton staff are working so phone calls may take a while.

Or as you say replace it with a freestanding model.

Don

[don]

I don’t know of any unless the mobile home or canal boat companies supply any. There is certainly isn’t any from the mainstream appliance suppliers.

You could look at these two appliances Zanussi ZWC1301 washer and add Hotpoint NV4D01 compact dryer.

Don

[don]

Ken, I wasn’t going to go there :rolleyes:

Don

[don]

1 kg is approx five long sleeve shirts so not much in the big scheme of things.

Don

[don]

electrofix wrote:this one

Dave

Fair play Dave, I think you have made a friend for life 🙂

Don

[don]

The only one which performs anywhere near is the Miele then it’s a bun fight between the rest.

If I am pushed to put one over the other then I would be leaning towards (in no particular order) Zanussi / AEG, Bosch and Hotpoint.

Don

[don]

Haven’t seen one of those motors in a while with the long shaft. For what it’s worth the part no. for the motor is C00233779 there was a pattern ELE3559 which is now obsolete as well.

Don

[don]

Just to close this thread, The new power board does indeed need calibrating and after some help from BSH it is a case of pressing certain buttons in a sequence. Trouble is the sequence varies depending on the hob range.

Don’t think we will be entertaining another one any time soon.

Don

[don]

Have you checked yourself? Don’t forget you need to add the correct filters?

Otherwise send a message to admin@ukwhitegoods.co.uk

Don

[Author]

Posts