Forum Replies Created
-
AuthorPosts
-
don
ModeratorRe: Kitchen Extension and Utility Room
Is the dishwasher slimline or full size?
Don
don
ModeratorRe: Kitchen Extension and Utility Room
Hi
More info required please?
Washing machine, dishwasher and tumble dryer are they freestanding or built in? Is the dishwasher slimline or full size?
Yes you can buy products that will come in on that budget but you will be replacing them sooner rather than later.
Don
don
ModeratorRe: Hotpoint condenser pump which 1 part number
Hi Garn
You missed an all important 8 out in your original post 95868085500 The pump part number in my last post is correct 8) 😆
Don
don
ModeratorRe: Blomberg TKF 8431 tumble drier
As attached. IIRC this came up on another thread a while ago for the same thing.
The whole panel assembly pos 200 is cheap enough at Connect at under £20 but not in stock :rolls:
Don
don
ModeratorRe: Blomberg TKF 8431 tumble drier
Hi
The attached picture should help.
Is it position no. 1022 and part number on the photo?
Don
don
ModeratorRe: Hotpoint condenser pump which 1 part number
garn wrote:hi. cant seen to locate the correct pump for this model theirs a change in pump looks smaller than the ones i have on board the van.
HPT SUTCD97B6PM9(UK)
S/N 9586805500
Hi Garn
The only model close to yours on Hotpoint database is the SUTCD97B6PMU commercial code of 086808 and the pump is C00306876.
Your commercial code looks to be 86805 which is not recognised by Hotpoint.
Don
don
ModeratorRe: Kenwood FP300 User Guide/Manual
Hi
I suspect Kenwood have no records left as it’s quite an old machine. Nothing much on Google either I’m afraid..
You could try this Kenwood instruction manual link, use the pull down section tabs. Most of the food processors work pretty much the same.
You could also try Youtube for any video’s.
Don
don
ModeratorRe: Replacement for a Neff dishwasher
Hi
You can use the compare tool on the Neff site here quite a handy option.
Don
don
ModeratorRe: Replacement for a Neff dishwasher
Hi Again 🙂
On Neff from the current range the S511A50X!G, S513G60X0G and the S513K60X1G all have polyinox bases all the others from there on have the full stainless steel wrapped inner.
On Bosch anything from series 4 and up will have the stainless steel wrap.
HTH 🙂
Don
don
ModeratorRe: Neff Dishwasher Leak – strange place?
MarkP80 wrote:
Not sure what to do for a new machine now, but it won’t have a drum with a join in it.It’s been mentioned a few times on these forums that Bosch and Neff have had problems with the Polyinox bases. Whether the newer batch have improved only time will tell.
If you are going to replace then make sure you go for one with an all stainless tank.
Don
don
ModeratorRe: Which of the two cooking sets to choose
No worries 🙂 Like most forum based sites we do get our fair share of spammers.
The older I get the more cynical I become ( not long before retirement 🙂 )
Here in the UK AEG is mainly sold through the John Lewis partnership. Most AEG machines are Zanussi produced appliances and by AEG themselves as they used to be in days gone by.
Bosch on the other hand is still made by the BSH group in their own factories dotted around Europe. The brand has a greater following over here and is regarded as one of the better ones.
The price of the two packages is similar, if it were me I would go for the Bosch 🙂
HTH
Don
don
ModeratorRe: Which of the two cooking sets to choose
Hi
Your ip address indicates you are posting from Slovenia. Products on mainland Europe are not the same as UK models. I would say that the Bosch would be the better bet out of the two.
Don’t post too many links as we may think you are spamming the site 😉
Don
don
ModeratorRe: Help with kitchen appliances
Hi
Yes you would save, Google is your friend 😉
Don
don
ModeratorRe: Help with kitchen appliances
Hi
I take it you are having the kitchen supplied by Howdens hence the Lamona products?
Beko make the Leisure and Lamona brands which are easy to service and obtain parts later in life if required.
To get better you would need to up the budget towards the Bosch range of appliances.
HTHDon
don
ModeratorRe: domesticwarrantyshop any done work for ?
Hi Ally
It doesn’t look good if the attached from November last is anything to go by.
Payment up front or run away fast.
Don -
AuthorPosts
