UK Whitegoods

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 26 total)

1 2 →

Author

Posts
June 23, 2015 at 11:23 am in reply to: Bush AG66TW – Hob not working #428349

drewb
Participant

Re: Bush AG66TW – Hob not working

Sorted, removed the switch, cleaned, oiled, working! 😀

December 14, 2014 at 12:01 am in reply to: Hotpoint Aquarius WDL540 – flashing flights #422669

drewb
Participant

Re: Hotpoint Aquarius WDL540 – flashing flights

Thanks for the reply.

June 18, 2013 at 5:58 pm in reply to: Neff hob & oven- Intermittent Sparking #378521

drewb
Participant

Re: Neff hob & oven- Intermittent Sparking

Solved. Transformer replaced.

April 16, 2013 at 10:11 am in reply to: C100WM10 – Currys pulley bolt size #393560

drewb
Participant

Re: C100WM10 – Currys pulley bolt size

19mm in case anyone else has the same question.

April 14, 2013 at 5:24 pm in reply to: C100WM10 – Currys pulley bolt size #393559

drewb
Participant

Re: C100WM10 – Currys pulley bolt size

It has the hex bolt.

April 14, 2013 at 9:23 am in reply to: C100WM10 – Currys pulley bolt size #393557

drewb
Participant

Re: C100WM10 – Currys pulley bolt size

I have a socket set and a set of spanners. From memory, none of them were the right size.

Thanks for your input.

April 14, 2013 at 8:33 am in reply to: C100WM10 – Currys pulley bolt size #393555

drewb
Participant

Re: C100WM10 – Currys pulley bolt size

PS: I’m not being lazy, just want to avoid a long trip just to measure bolt size.

Thanks

April 13, 2013 at 11:01 pm in reply to: Tricity Bendix AW 850W not spinning #393158

drewb
Participant

Re: Tricity Bendix AW 850W not spinning

Is the belt still on?

February 26, 2013 at 8:29 pm in reply to: Be Modern Detroit Electric Fire – Replace heater element? #390974

drewb
Participant

Re: Be Modern Detroit Electric Fire – Replace heater element

Thanks

August 1, 2012 at 11:09 am in reply to: Neff hob & oven- Intermittent Sparking #378519

drewb
Participant

Re: Neff hob & oven- Intermittent Sparking

Hi,

Can anyone advise the next step apart from repairman or replacement?

Thanks

July 30, 2012 at 3:56 pm in reply to: Neff hob & oven- Intermittent Sparking #378518

drewb
Participant

Re: Neff hob & oven- Intermittent Sparking

Would replacing the ignition transformer be the right thing to do here?

Thanks

July 28, 2012 at 10:48 pm in reply to: Neff hob & oven- Intermittent Sparking #378517

drewb
Participant

Re: Neff hob & oven- Intermittent Sparking

e-nr T2113N2EU/02 FD8104

July 25, 2012 at 11:46 am in reply to: Neff hob & oven- Intermittent Sparking #378516

drewb
Participant

Re: Neff hob & oven- Intermittent Sparking

Ok, I see. Is it easy to life the hob to see model number etc?

I have given the hob a good clean where it sparks and it seems to have reduced the frequency of the sparking but it has not been eliminated.

June 29, 2011 at 11:53 am in reply to: New Washing Machine – Close off hot water pipe #354221

drewb
Participant

Re: New Washing Machine – Close off hot water pipe

Got it sorted by using the stop tap and capping off.

Many thanks for the help and replies.

June 25, 2011 at 5:07 pm in reply to: New Washing Machine – Close off hot water pipe #354218

drewb
Participant

Re: New Washing Machine – Close off hot water pipe

Thanks.

There is definitely no lever on hot pipe under sink.

Its an ex-council house and they fitted a new kitchen etc under two years ago.

I suspect it just hasn’t been fitted. I presume the only other option is to try and find a stop cock further up the chain and drain the water from the pipes before fitting blanking cap?
Author

Posts

Viewing 15 posts - 1 through 15 (of 26 total)

1 2 →