[dunston]

thanks dave and kentish.

[dunston]

Thanks Dave. We have an ASWO account. They are very good.

[dunston]

Could be. The engineer doing this job is on holiday today. Do you have a part number?

[dunston]

Thanks. I’ll check the harness and TOC

[dunston]

Thanks Dave

[dunston]

Yes tried a different socket in a different room via a extension lead

[dunston]

Thanks for your help but the customer hates the dryer and has bought a new one.

[dunston]

ok,. thanks jem. i would appreciate it if you could send us the service manual.

mark

[dunston]

It was both Pcb boards in the end. the second board took over a month to arrive, but finally got it sorted.

[dunston]

the saga of the grundig tumble dryer goes on. with the original display board fitted the time delay light flashes constantly but the dryer will not power on the display. if i fit the new display board there are no lights flashing and it will not power on. i don’t understand this as i thought the light flashing may be an error code?

[dunston]

thanks Dave. will take another look
Mark

[dunston]

I have looked at the resistor at R4 on the board. it looks like a 11 ohm resistor. i am getting 33 ohms reading through it. does the resistor go open circuit when it fails?

thanks mark.

[dunston]

thanks Dave. will check that out.

[dunston]

Thanks Dave.
Have you had a water inlet solenoid valve damage a PCB?

[dunston]

We have had a couple of integrated Beko dishwashers with steam coming out of the top of the door.Reinstalling them correctly stopped that fault.
Lamona and Beko dishwashers door switches will operate even if the door is not completely closed. check all the screws in the door and check the hinges are not bent.
We have repaired dozens of these dishwashers – it is a strange fault.

[Author]

Posts