[dunston]

Thanks Dave. Will check condenser.

[dunston]

Re: Zanussi PCB R93 resistor value

Thanks Dave.
The resistor has broken up that’s why i couldn’t read the value.
Have you every changed the power chip? Do you mean the link switch?

[dunston]

Re: LG F14A8RD6 washer dryer

It wasn’t showing CL in the display.
Held in the child lock button and it bleeps twice.

[dunston]

Re: zanussi tumble dryer error ZDC8203W

Model number ZDC8203W not ZDC823W

[dunston]

Re: Zanussi ZKG7145 914604048/01 washer dryer

Tried disconnecting dryer elements and wash element – same problem.
On wash it fills and washers for a couple of minutes then aborts.
Displays 1. Stops full of water.
Diagnostic shows E66

[dunston]

Re: CNA CH60SS extractor hood

Yeah. Did see the Baumatic CH60SS . Cannot be sure its the same model. Going to replace the complete extractor hood.

[dunston]

Re: Bosch WAS287B0GB/23

We have fitted 00648581. Slightly different profile.

[dunston]

Re: Zanussi ZKG7145 914604048/01

Update.
Replaced relay PCB 1324478203.
Machine repaired.

[dunston]

Re: Zanussi ZKG7145 914604048/01

Yeah.. Heater insulation test OK

[dunston]

Re: Neff d/w water tap flashing

Anti flood fault
Check for water leaks.

[dunston]

Re: Beko WMB81442 washing machine

thanks Martin. We know its a tacho fault however is it a faulty motor or a faulty control PCB ? .( Brush motor )

[dunston]

Re: Whirlpool oven AKZ551/IX 858555115000

Can anyone help – please.

[dunston]

Re: Belling cooker 600X WH

The glass flap is smoke brown and the hinges push into the end of the control panel.
The glass flap was the same on white or brown cooker.

[dunston]

Re: AEG cooker 321V-W 611.251.914

Energy regulator 50.57071.010 replaces 50.17071.200 (p/n 66132059) wire for wire.

[dunston]

Re: AEG cooker 321V-W diagram

I’ve found a circuit diagram

[Author]

Posts