[dunston]

Thanks Dave

[dunston]

Their is a permanent mains supply to the board. If the power supply on the board has failed would it have no output? The fault is a random no output failure

[dunston]

I have seen the fault on this machine. Forget the 3E error. It came up when her husband had googled the fault.
The washer fills, drum tumbles and i can hear a circulating pump running then after a couple of minutes the drum and circulating pump stops.
The display stays illuminated and stops counting down.
Pressing the start button the washes continues to wash then at some point will pause again.
This continues through the program.
Anyone had this fault?

[dunston]

Thanks Dave. Worth trying.

[dunston]

This was a door interlock fault – replaced interlock

[dunston]

dunston2@talktalk.net

[dunston]

Thanks Dave. Can you identify the MCU and CCU? Do you have the complete manual?

[dunston]

Its correct.

[dunston]

Thanks. Very interesting.

[dunston]

The part number is on the switch 33301037

[dunston]

Update: this may be useful to someone the part number is 0738188 or X1110000002 or 49041019 all the same switch. It is different to the original.

[dunston]

Kompact KC90MF function switch – a number printed on the side of the switch is 8-33301037

[dunston]

Thanks Don. The attached file in that thread we cannot open it.( Invalid file specified.). The part number 40514 on Connect is a Genuine switch and a alternative is a Baumatic switch. The Genuine switch is no longer available. The oven we are repairing is only 6 months old.

[dunston]

Could be DEL079008001F. Contact CDA to check.

[dunston]

The dryer fan blade was full of fluff. Thanks again Dave

[Author]

Posts