[dunston]

Has this model got a 196* thermal fuse (not resettable) in line with the belt switch?

[dunston]

No parts for this model.

[dunston]

Nothing runs at the start. The drain pump will run by operating the anti flood float.
I’ll check the door switch.
I’ve repaired dozens of these dishwashers but the flashing tap light is something I haven’t come across before.

[dunston]

Its not filling.

[dunston]

I know the flow thro sensor 00611317 – They usually fail while filling – its not filling.
What’s the drain valve? do you have a part number?

[dunston]

Thank Jem. I’ll give that a go and post the result.

[dunston]

Thanks. I’ll check out those faults.

[dunston]

thanks Dave. has me even more confused now as there is no motor action and this seems to be a heater fault. further inspection is needed.

[dunston]

Thanks kwatt. typo error. Fat fingers.
WDQY1014EVJM-GB
WD254 WDQY1014EVJM-GB
1WJ100328VOWWD254120079
no ART number

[dunston]

Had same fault last week on a WAJ28008GB/08. The door wouldn’t lock.Tried a new interlock- same fault.
This machine is 25 months old. Has to be a PCB fault.

[dunston]

No Dave defiantly not child lock.
The child lock activates and can be deactivated

[dunston]

We have have opened an ASWO account today. Thanks.

[dunston]

We don’t have an account with ASWO.

[dunston]

We have had a number of these dishwashers with a reported no heat fault and when the tacho is tested it seems OK. And if the element continuity is correct.
We always replace the tacho. It has worked every time. Beko coil part number 372205506 fits.

[dunston]

Thanks Dave. The dishwasher drains OK. At the start of a program the pump runs so long its as if the dishwasher thinks it still has water in.
Do you have a parts diagram?

[Author]

Posts