[eng14]

Re: hotpoint 9575

thanks for that i tried it today and its to long for the fhp motor plug,its the old 8 inline with two pices sticking up.we used to see it on the wiring diagrams that hotpoint supplied with there motors,the good old days next to the old 3and 3 plug,richard 😕

[eng14]

Re: creda condenser dryer

yes martin one of the best around richard 😉

[eng14]

Re: bosch/hotpoint d/w

thanks all great help,richard. 😀

[eng14]

Re: kirby g4e

thanks brian,richard. 😀

[eng14]

Re: hotpoint 7842 d/w

thanks all ,timer has burnt connection in two major places,move the wires and she runs,let them go and it stops,ta richard 🙂

[eng14]

Re: whirpool ikea d/w dwf415s

thanks for reply,it flashes 6 times then pause then 6 again,ta richard 😕

[eng14]

Re: indesit w123 uk bg

hi guys thanks for the reply,it has a plastic tank,s/n91268710002.hope this sheds some light onto the problen,richard. 😕

[eng14]

Re: diplomat ahy44**

thanks for the reply guys,this oven has circular element alanj,dave i like your prognosis.i took this mod no from user manual,any idea what p/nos hinges and sel are likely to be,thanks richard.

[eng14]

Re: wm 52 hpt

thanks guys ,iaddom when u say cut the lugs off i presume u mean on rast plu so it enters wiith lug edge opposite to grooves in motor plug,if this works why buy 1604976 and what do u get in kit for your money,how much.why dont they leave things alone,with gec motor,bet indesit are lurking somewhere,thanks richard.

[eng14]

Re: aeg oko 1370 605423909

thanks whitevanman,nothing showing in panel at all,richard.

[eng14]

Re: Tricity Bendix BD911 Oven

hi you remove screws from front cavity,take door away first ,then seal will go around surround hole and screw back,richard,same as zanussi 🙂

[eng14]

Re: diplomat adp8152 d/w

please order thrmo limiter 4 me ,be most grateful asap,0120800830 many thanks richard,please confirm you got tis message.

[eng14]

Re: diplomat adp8152 d/w

hi yes could you order me a thermo limiter,0120800830 please asap,ta richard.

[eng14]

Re: miele novatronic wt945

is it the probe in the heater,similar to hotpoint ones richard,would this cause a boiler as i put them richard

[eng14]

Re: whirlpool awm 6145/3

dave went back today,checked sump hose flter,drain hose,put new pump on stillfault appears half way through wash.must now assume timer or display card fault,what do you think,richard,fault code fp

[Author]

Posts