[franz]

Re: indesit w103uk

There is a kit called “chassis repair kit” – available from Connect costs about £25
Franz

[franz]

Re: indesit IS70C

I heat new belt in a bowl of hot water while I strip machine then loop old belt around new belt to pull it over jockey wheel – proper way to do it is remove heater cover and fan – remove 4 bolts – rotate motor until belt can be fitted over wheel then rotate motor back and refit bolts – but you need biceps like King Kong to do it.
Franz

[franz]

Re: Mistrel FF92 thermistors

they changed the length – short one only fits older models – long one fits all models
Franz

[franz]

Re: Cancellation of Contracts Made in a Consumer’s Home

The clue might be in the title “UNSOLICITED”calls act.
If the customer books a call then the call is NOT unsolicited.

Franz

[franz]

Re: w/pool d/w adp4403

Thanks BZZ – will try that

Franz

[franz]

Re: Extracare lose Howdens?

It’s true – belling engineers did w/m course last week
Franz

[franz]

Re: hotpoint BFBF162 D/W

She has probably opened door before prog was finished – to cancel prog hold down P button for about 7 secs you will hear 4 or 5 beeps – prog can then be reset.
Franz

[franz]

Re: Bosch kgu3201gb

PUP – couldn’t see a door switch on the freezer – unless the fridge door switch controls the freezer as well –
Franz

[franz]

Re: Zanussi wjd1667w & AEG l16810

Thanks mate – turned out to be dodgy dryer water valves on both machines – intermittantly working – now sorted

Franz

[franz]

Re: Prima lpr 450 whose is it

If it’s a built in oven – possibly whirlpool – check label with service info – looks just like whirlpool

Franz

[franz]

Re: TECNIK TKL 9260, BRUSHES

Try Bosch as they produce a lot of the tecnik machines –

Franz

[franz]

Re: Zanussi zwf1111w

Thanks Steve , but valves are o.k. and I dont get any flashing lights at all .
ps anybody got a part number for the PCB as Connect list a part number that comes back as unknown when you try to order it.

Franz

[franz]

Re: Ariston Margherita 2000 AWD 12

try the heater – an o/c heater sometimes gives an f7 fault

Franz

[franz]

Re: Tecnik TKL9260

Thanks Andy

Franz

[franz]

Re: Indesit Test Tool

Arcadia machines will be programmed using a smart card – looks like a chip & pin card which also requires a card holder – these are in short supply so Merloni will program any Pcb sold to the trade meantime – eeprom is already on Pcb so no need to buy one seperately.

Franz

[Author]

Posts