Forum Replies Created
-
Posts
-
Re: How difficult are Miele Repairs?
Hi Andy
No, the new ones front panels come off completely.Greg
Re: washing machine not spinning
Hi
With unit un-plugged, I would be checking those carbon brushes 😉
This is easier said than done on this motor though 😕 The motor will have to be taken apart 😯 to gain access to the brush assembly.
Original brushes module is 496876 but depending how nifty you are with a soldering iron you could use BS12102 which is the cheaper but more trickier solution. Both are available from spares@ukwhitegoods.co.uk
If you feel this is more of a task than you need then feel free to find a qualified engineer in your area from the link below 🙂Greg
Re: Fault Code Guide
Yes on a daily basis, used it today on a Bosch, see I can’t remember all of the codes 😆
And last week on a Diplomat/Smeg dishwasher 😀Greg
Re: QED ?
Does dal have to keep posting to bump, it really pees me off. He has posted an advert once, leave it at that :rolls:
http://www.ukwhitegoods.co.uk/modules.p … 882#148882Greg
Re: Goatboy’s turn?
He’s erm being put out to pasture then 😉 😀
Glad its going well anyway 8)Greg
Re: Bosch Fridge Hinge – Which One Is weakest?
Replace both IMHO, job done.
I take it its a larder built under? The hinges are not up to the job (as in ALL single built under) They have the door of the appliance,the cabinet door then all the milk containers etc in the door shelf to take the strain of.
They never stood a chance 😆
GregRe: Cooker Hood installation
Not sure about quality of make but what I would say is if its going above a range with gas hobs, make sure you follow the min height in the hoods handbook. If no booklet available, a rule of thumb above gas is 750mm above hob top and above an electric hob, 650mm. 😀
Greg
Re: bosch dishwasher
Its either the transfer tube,pressure unit or the water matrix that is gunged.
It been exhaustively covered, just do a search 😀Greg
Re: Bosch Dishwasher SGS43C02gb/35 Intermittent Stopping
I bet the socket is mounted behind the dishwasher and the plugtop is melting into the acoustic/thermal tar 💡 Check customers socket and plugtop for overheating.
Greg
Re: Neff B1420 oven
Power off will suffice, wearing wellies while doing it is a tad erm kinky 😆
Greg
Re: Neff B1420 oven
Hi
You will need p/no BS14106 for the fan unit complete and from experience you would do well to replace the circular element aswell. p/no
ELE2044. Both spares available from spares@ukwhitegoods.co.ukThe element can be changed form the front but the fan motor will require access to front and rear.
Power off if you are to attempt yourself or find an engineer from the link below 😀
Greg
