Forum Replies Created
-
Posts
-
Re: Bosch WFF147SGB/01 timer knob spinning
Hi Simon
Yea 266696 should do the trick, its plastic taking the strain of a stiff timer TBH 😥Greg
Re: Bosch WFL2450GB/01 – not empting at end of wash
Hi
I would change both valves IMHO
If as you say it keeps filling even when not powered up then its definately one of the water valves staying open. If you don’t want to change both, the best way to deduce which one is at fault is to turn of the feed tap to each fill hose in turn to see which stops it filling.
Parts are as follows,looking from the rear of appliance, l/h valve is p/no 428212 and the one next to it is p/no 428210. Both spares are available from spares@ukwhitegoods.co.uk .Around the £10 – £20 each plus the usual.Power off if you are to attempt the repair.
Greg
Re: Bosch wok2001gb/05 Bearings
Hi
Never done one, sorry.
Have sent you exploded picture, it may help 😥Greg
Re: Loud ‘cracks’ on a wash cycle on SMEG DWF 64 SSE
rob_bot wrote:I need some bits for the rs21dcns Samsung too (defrost heater/water tank) can you supply those as well?
Yup, no problems there 😉
Greg
Re: dishwasher stopping mid cycle
Ok
How about the connectors on the module.the mains suppressor at the rear or dry joint /s on the module. Power off of course prior to investigation :plug:Greg
Re: Loud ‘cracks’ on a wash cycle on SMEG DWF 64 SSE
Hi
It sounds like the mains suppressor is breaking down.
With the power off, you will need to locate it and change it. On this one I think it is front left behind the lower plinth.
Part is available from spares@ukwhitegoods.co.uk if required 😀Greg
Re: dishwasher stopping mid cycle
Hi
I would first check the mains socket and plug for signs of overheating or if you have wired the plug yourself I would check to see that the screw terminals are making good contact to the wires.
Try those for starters 😉Greg
Re: Fault Code Guide
Was seeing if ebay were selling the book and erm found this.
Is there something we are not being told 😆
http://tinyurl.com/2oc8gg
GregRe: Bosch Exxcel 1400 Not Spinning
Hi
Far easier with the motor off to change brushes.
The brushes if required are here but if you pop your model number up which can be found around the door inner or on the rear of the applaince; then we can be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.
Please unplug first before attempting any work on the appliance :plug:Greg
Re: Bosch WFO2866GB/07 dead.
Dry joint on PCB quite popular 😉 Look around the selector area 😀
Greg
