Forum Replies Created
-
Posts
-
Re: BOSCH washer wont spin or drain!!!!!
Hi
We if you have checked filter,hoses and drain hose exit (and your plumbing) then the pump is suspect no1.
Without seeing it myself this is the best I can advise 😀
Unplug appliance if you are to investigate appliance internally :plug:Greg
Re: BOSCH washer wont spin or drain!!!!!
Well I think you have narrowed it down to a drain/ pump problem and not a module/motor problem 😀
Greg
Re: Using Laptops in the field
Why would you want to use a laptop in a field (Goatboy excluded 😀 )anyway 😆
Greg
Re: BOSCH washer wont spin or drain!!!!!
Hi
Pump impellor is behind the filter when removed.
The impeller should when turned “twang” every quarter turn.
Have a good luck in the housing aswell for anything trying to hide.
GregRe: BOSCH washer wont spin or drain!!!!!
Hi
No drain = No spin.
You may have some debris that is jamming the pump impeller and/or blockage internally or where drain hose evacuates; but after nine years of action I would imagine the pump is getting a bit tired IMO.
If pump is required it is p/no 144488 app £65 and available from spares@ukwhitegoods.co.ukGreg
Re: Spares. Bosch control board for washing machine
Hi
Yes from Bosch only, no pattern available that I know of but I could be wrong 🙂
Part in question is BSH p/no – 491123Greg
Re: WHIRLPOOL 3LER543DQ1
Hi
Still nothing on that one 😕 it may be an import, therefore not on European system.
John Mac may shed more light on it for you 😀Greg
Re: New products
kwatt wrote:To “plumb” it in for draining a one-armed idiot could do it, so Gegsy is good to go! 😆
Oi, I can read 😆
Sounds a good appliance BTW 😉
GregRe: Bosch SRS43A02GB/14 slimline dishwasher overfill
Ok Simon
Check top microswitch on Pressure Chamber for correct operation.
Check module connectors also for scorched connections. 😀Greg
Re: Bosch SRS43A02GB/14 slimline dishwasher overfill
Simon46 wrote:fills continuously.
If during drain at beginning, then fill valve triac on module 😥
Module 489716 @ £68.10 +VAT etc retail.Greg
Re: Bloons
All completed :tup:
I would still like to hear more about erm, Martins balloon shenanigans in the wee hours :snig:Greg
Re: Bosch SGS09L12GB/14 Fitting new pressure chamber BOS4975
Hi Richard
Matrix shouldn’t be a problem and the fault shouldn’t re-occur if you educate all loaders of the appliance to do what I posted earlier on 😉
Glad you sorted anyway 😀Greg
Re: Bosch SRS43A02GB/14 slimline dishwasher overfill
Ere Simon
You’ve not forgotten the most spoken about fault have you 😉
The dreaded hose from pressure chamber to sump,pressure chamber itself and/or water matrix being gunged up:?:
Failing that does it fill continually when draining? If so it may be the fill triac on the module that has blown. 🙂Greg
