Forum Replies Created
-
Posts
-
Re: Blank LCD Bosch Logixx WFR3268
Never changed an LCD panel on any Bosch TBH.
I would summise faulty display module (424675) and/or faulty main module (491974)
If I was a betting man, I would go with display module 😉
An email to spares@ukwhitegoods.co.uk will supply you with either module 🙂Power off if you are to attempt any repair :plug:
Greg
Re: Non Payment
If in any doubts, ask before doing any work; is there a cheque/cash for me on completion.
If the answer is NO then walk, surely 😀Greg
Re: Bosch SGV43E03GB/16 fills then drains, won’t run a prog
Hi
Apologies, yours doesn’t have the metering unit and the water matrix isn’t problematic on yours 🙂Most probable cause is the impeller jug (flow meter)
These have a stupid failure rate 😡HTH
Greg
Re: Bosch WFL 2450 program not advancing???
Hi
When you say manually advance, do you turn selector to 12 oclock (off pos) and then re select rinse?
Does it heat in the wash? (feel the glass during wash cycle )Greg
Re: Bosch SGV43E03GB/16 fills then drains, won’t run a prog
You are on the right lines becsom. I take it that was the ribbed hose from the sump to metering unit on the lhs?
If you remove the l/h panel and look at the water matrix and the metering unit, Im sure there will be signs of crud build up.
Changing those two parts, if crud visible should sort you out.
This usually occurs due to food debris off plates being spattered around.
A quick swish under tap of crocks before loading will reduce this problem in the future 😉Power off before attempting removing that panel or any work on appliance :plug:
Greg
Re: Bosch KGU3201BG Fridge Freezer – Freezer Temp Fluctuate
Are the products in the freezer solid?
If so it may just be that the NTC sensor is going out of tolerance giving you a false reading.You could also try a 48 hour period with the appliance switched off, just to start the frost free off on an even keel. Frost free’s do occasionally get the defrost wrong and eventually get to a point of no return and need a manual defrost (switched off).
GregRe: Bosch dryer
It looks as if the child lock is on.
To remove it, close door, select any prog and then hold the start button in for 4 secs.Greg
Re: “Ooooh Matron” ?
Deleted and helo’s reply
From: helo_75
To: gegsy
Posted: Wed Jul 16, 2008 10:48 pmit will only be the one ( i know u can see my i.p)
cant u restrict him from posting?
GregRe: “Ooooh Matron” ?
I have deleted 😀
Have also PMd helo saying its not a good idea, Adam is doing a fine job himself.Greg
Re: which Side-by-Side (usa sytle) fridge to buy?
I would agree with Don, the new Samsung RSH range are a superb piece of kit for the money along with full engineer back up; should the need arise. 😀
Greg
Re: siemens w/m lights on but no go
Hi
If its doing that it relates to the analogue sensor being out of its operating range or connection from it to the module missing.
If required its 182238 £23.69 + the usual.
As if you didn’t know, they don’t click when you blow down them. Usually doing this results in permanent damage to the little guy 😀Greg
