Forum Replies Created
-
Posts
-
Re: Whirlpool American side by side
Hi
Had the water dispenser not been used for a while before the filter was fitted?Greg
Re: Bosch SGS6302GB/07 won’t stop!
Hi
I have assumed that there is no water in the plastic base below the main stainless tank, as you said you have gained access to the inside and not mentioned seeing any water that may have driven the anti-flood float.
GregRe: bosch S9VT1B – not filling
Hi
Yes correct model number SGS69L02GB/22 thanks. 😉
If you remove the lower metal panel to gain access to the clear tube that goes from the metering unit to the sump, remove,clean and re-assemble.
You can also remove the l/h panel and look if the water matrix and the metering unit is gunged up.Un plug appliance before attempting any of the above :plug:
Greg
Re: Testing or Bypassing Door Interlock
happycack wrote:Thought that was part and parcel of the site and not to involve the public!
It sure is
Still think it’s biased. Turns out I’m the only one to have bypassed a door lock, gone over 30m.p.h. in a built up area and used a mobile phone in the car! Point being
This is not a witch hunt and the latter two offences have no bearing on the original post
I think I have enough intelligence to way up the situation and leave the rest to the customer.
Its been mentioned, on a given day of the repair you may asses the situation but x days/years down the line, who knows where that machine will end up. BTW both of those instances don’t make it acceptable.
Put it to bed now.
Gladly, the consensus is don’t do it for moral and safety issues.
Greg
Re: My Home Connect?
Ken
Now this is all out in the open and verified, would it not be in the publics interest to have an insight into this companies actions ❓
GregRe: Bosch Exxcel Tumble Drier not heating
Martin wrote:If you have ever been guilty of turning the machine off before its automatically completed its cycle?…Then that’s your problem for sure!
Just to reiterate and eliminate.
Greg
Re: Bosch SGS5002GB/01 drain problem
Hi
No need to remove the door, you can access from front with appliance on its back but you will need to loosen base to wider the access.
We really cannot be anymore specific unfortunately as to the full blow by blow of the repair sorry.
Un plug appliance first :plug:
GregRe: Bosch SGS5002GB/01 drain problem
rich1969 wrote:Is this the pump i need for the classixx —–>
http://www.ukwhitegoods.co.uk/modules.p … cts_id=355If your model is there then yes, if not pop it up and we can check if its compatible 😀
Greg
Re: New dishwasher drying fault with quality 3 in 1 tablets
Hi Spoon
You may find this link quite helpful. 😉
http://www.ukwhitegoods.co.uk/modules.p … ge&pid=116Greg
Re: Bosch SGS6302GB/07 won’t stop!
Should be a metal plate that is connected to that plastic base part you mention, this has 2 torx 20 screws at the front to enable it to be removed.
Greg
Re: Bosch SGS6302GB/07 won’t stop!
Hi
Front lower panel should come off with 2 torx 20 screws to gain access. Can’t really give you a full strip down guide sorry.If you are in any doubts please feel free to use the engineer link below.
Greg
