Forum Replies Created
-
Posts
-
Re: bosch dw door leak
……also if the lower spray arm is restricted in rotating and build up of crusty crud remains around main door seal and along the stainless and rubber of lower door seal, this will have same effect aswell.
If what has been posted checks out then I would be looking at changing the lower door seal which AFAIR has been modified; and isn’t as bad as it looks to change 😉 P/No 298534.Greg
Re: neff oven
Bryan wrote:
nationalhomecare wrote:
if the cabinet cooling fan don’t kick in then then oven temp won’t rise over 100 as it regulates off the high temp stat mounted in the back by the main oven fan,Would this not result in the oven cutting off , totally dead?
Yes it would Bryan until cavity cooled down to within operating temperature. 😀
Greg
Re: So, this server upgrade…
Hi Bill
Ken has explained in his opening post the problems and judging by the operation of the site at present, the upgrade to the new server has not taken place.
Only site admin of course have the full information and Im sure will update us all soon 😀Greg
Re: Getting rid of the “Bleep”
Hi Colin
I see you appear not to be a trade member. If you should require trade access then please contact site admin to gain more access to the site 😀Greg
Re: Forget ISE: HOT is what we need.
The worrying thing is, is that two esteemed engineers have been searching for this sort of appliance 😯 😆
Greg
Re: So, this server upgrade…
Any down time is fine as long as log on sql farked off message doesn’t come back 😆
Greg
Re: Noisy boiler, not the missus
OR has some dimwit put some of the radiators the wrong way round upsetting the regulator valve on the radiator, I know this because I have had some dimwit do this 😆
Greg
Re: WXLS1650EU/04 – Drum doesn’t spin
Hi Hans
Apologies to you. The motor is an inductive type, hence no brushes shown. 😳
This is quite an intensive machine so I would personally seek pro help rather than change expensive items. Obviously with the appliance unplugged look for poor connection from motor to module etc 😀Greg
Re: Getting rid of the “Bleep”
Hi
That model you supplied is mad 😆 I am going to assume WAE28162GB/03 8)
The sound selection should be in your user manual AFAIK but just incase, check your email 😉
GregRe: WXLS1650EU/04 – Drum doesn’t spin
Hi Hans
Have moved you to the European Forum ok 😀
This model does not show motor brushes/carbons as a spare, just a complete motor.
I am guessing that the brushes have worn down but without inspecting is difficult.
Unfortunately, we cannot give out specific tech data as most of it is copyright sorry.If required the motor is p/no 143455. For an accurate diagnosis you may need to conatact a local Siemens engineer in your area.
Greg
Re: P.Cowan… small oven not working ? HELP?
Please use the link below to find a Corgi registered engineer as it will not be a repair you can undertake.
Regards
GregRe: Neff double fan oven tripping RCD
reworsley wrote:…. just trying to find out if you’re both suggesting the same thing – the oven heating element.
In that case eastlmark has probably hit the nail on the head.
The part you need is 494643 the half moon element.
Spare available from spares@ukwhitegoods.co.ukGreg
