[gegsy]

Re: Whirlpool S20DRSS10 – circuit board advise needed

Hi ronmi
You never said what the fault was initially so would be difficult to confirm if the “card” YOU mention is actually at fault 😉

Greg

[gegsy]

Re: Is this one of ours

Hi Ken
So I take it Capital Repairs is off the repairs@ listing pending outcome of this?

Greg

[gegsy]

Re: Cutbacks

Hi
I might of mentioned this chestnut a while back so forgive me if I have.
When a Joe Public joins UKW can they not be sent Chris’s Rules for Advice in the Public Forums as an automated email??

Might reduce the amount of stupid questions and repeat gas qustions we get 😀

Greg

[gegsy]

Re: Whirlpool S20DRSS10 – circuit board advise needed

Hi
I would look for an engineer off this site from my link below whom will be able to confirm the fault and be able to fit the spare competently.

Greg

[gegsy]

Re: Is this one of ours

Hi
So is there any updates on this? It just seems to have been left and thats that 😕

Greg

[gegsy]

Re: Bosch kge3416gb/53

Link sorted 😉

Greg

[gegsy]

Re: Bosch Dryer WTA 4107 GB/01 Belt !

Penguin45 wrote:437367 is the belt.
Chris.

Sure is and is £19.40 list price 😉

Greg

[gegsy]

Re: Bosch Dryer WTA 4107 GB/01 Belt !

Never heard of that and would be a very costly exercise, who told you that load of cobblers 😆
If its under 2 years old it will still be under BSH guarantee 😀
Greg

[gegsy]

Re: Bosch kge3416gb/53

Hi Machine man

The list price is £40.40 from BSH. Try here
http://www.bshappliancecare.com/bshspares.html
Im in North Wales 😀
HTH = Hope that helps 😛
Greg

[gegsy]

machineman wrote:its the wrong tranny the one i want is on a pcb board, is it 264671.m

264671 is showing as power supply unit. That will be the one to power the appliance electronics the other I gave will then be to power the halogen lights HTH.

Greg

[gegsy]

Re: Whirlpool AWM 6111 6K

Hi Steve
The brushes are in the motor and may have worn down (New are app 1.5 inch). If you are unsure and need an engineer please use the link below.

Greg

[gegsy]

Re: Whirlpool AWM 6111 6K

Hi
With the appliance unplugged :plug: remove the motor and check the brushes lengths.

Greg

[gegsy]

Re: whirlpool ice maker problem s20

Hi
Its quite possibly a faulty receiver and/or transmitter optics.
These are an intensive appliance and may be in need of professional expertise.

Please feel free to use the link below to find one.

Greg

[gegsy]

Re: Bosch Dw SRS 56A02GB/B

Lawrence wrote:I fitted a new heat exchange unit on this not so long ago could this be playing up ?Lawrence

Hi Lawrence, hows you?
Its quite possible, they are tempremental. Sometimes a small leak from the o ring which attaches the unit to the sump is the culprit.
Heater exchanger – 483058.

Greg

[gegsy]

Re: Known Error Codes

You sure about F7, it usually means that the drum is jammed mainly customers leaving the drum door flaps open 🙂

Greg

[Author]

Posts