gegsy

Forum Replies Created

Viewing 15 posts - 4,021 through 4,035 (of 6,724 total)
  • Author
    Posts
  • in reply to: whirlpool g2p dwi not completing cycle #190441
    gegsy
    Participant

    Re: whirlpool g2p dwi not completing cycle

    Hi
    Ok then by what you have said in the first post I would imagine that you have
    1/ Clogged or dirty filters
    2/ Dirty or faulty Water Indicator (WI)
    3/ Faulty Module/PCB

    The WI is situated below in the sump below the filters when removed at a 3 o clock position.

    Un plug appliance before attempting any repair :plug:

    Greg

    in reply to: whirlpool g2p dwi not completing cycle #190439
    gegsy
    Participant

    Re: whirlpool g2p dwi not completing cycle

    Hi
    Could you post up the 12 NC number, situated on door frame under barcode, cheers.

    Greg

    in reply to: Hotpoint Dishwasher Mod DWF 33 #189485
    gegsy
    Participant

    Re: Hotpoint Dishwasher Mod DWF 33

    Ashby wrote:Hi Jim, I’ve found that this machine is leaking from the sump seal.

    Have you looked closely for pin holes in stainless steel on area around salt unit inside tank as previously stated by Martin; or the salt unit retainer collar having come loose? Worth a check 😉

    Greg

    in reply to: servis m4605 #190413
    gegsy
    Participant

    Re: servis m4605

    Either insufficient water and/or circulation,faulty circuit board or broken wire/s in door loom.

    Greg

    in reply to: sevis dishwasher #190411
    gegsy
    Participant

    Re: sevis dishwasher

    Hi
    An email to spares@ukwhitegoods.co.uk quoting p/no 720414300 may give some result app cost £120 😉

    Greg

    in reply to: Tri Ben AW1000W a/w #190433
    gegsy
    Participant

    Re: Tri Ben AW1000W a/w

    CDSL showing same pressure switch, non returnable with zero stock and no alternative 😕

    Greg

    in reply to: WHIRLPOOL DISHWASHER ADG7540 #190351
    gegsy
    Participant

    Re: WHIRLPOOL DISHWASHER ADG7540

    Hi
    Sounds like the NTC (Feeler) has become faulty.
    An email to spares@ukwhitegoods.co.uk quoting p/no 481228268035.

    Un plug appliance before attempting any repair :plug:
    Greg

    in reply to: Fault Code Bible #189915
    gegsy
    Participant

    Re: Fault Code Bible

    Ok give me some models to get me started as there so many 😀

    Greg

    in reply to: “Ooooh Matron” ? #164796
    gegsy
    Participant

    Re: Number 2 is watching.

    Rover coming for you Ken 😆

    in reply to: “Ooooh Matron” ? #164794
    gegsy
    Participant

    Re: Number 2 is watching.

    in reply to: “Ooooh Matron” ? #164793
    gegsy
    Participant

    Re: Number 2 is watching.

    So you don’t know who Rover is either?

    Greg 😀

    in reply to: Cannot get parts for a 6 month old washing machine!! #190267
    gegsy
    Participant

    Re: Cannot get parts for a 6 month old washing machine!!

    oooooooooo satire 😆

    in reply to: Watching #190283
    gegsy
    Participant

    Re: Watching

    This is where it all began about 50 miles away from me 😀

    Greg

    in reply to: Bosch Worktop Dishwasher (SKT20) #190246
    gegsy
    Participant

    Re: Bosch Worktop Dishwasher (SKT20)

    You are about right with impeller part no and price aswell 😉

    Greg

    in reply to: Bosch Worktop Dishwasher (SKT20) #190244
    gegsy
    Participant

    Re: Bosch Worktop Dishwasher (SKT20)

    Loads P, about 15 and usually debris and crud and some door hinge abuse.
    Worth bearing in mind then these impellers?

    Greg

Viewing 15 posts - 4,021 through 4,035 (of 6,724 total)