Forum Replies Created
-
AuthorPosts
-
September 15, 2006 at 8:14 pm in reply to: Bosch SGS43E02 pump runs forever – no water in base… #188695
gegsy
ParticipantRe: Bosch SGS43E02 pump runs forever – no water in base…
Just to add, its worth checking the float hasn’t been chewed to a pulp also and activating flood microwitch 😉
Greg
September 15, 2006 at 8:11 pm in reply to: Bosch SGS43E02 pump runs forever – no water in base… #188694gegsy
ParticipantRe: Bosch SGS43E02 pump runs forever – no water in base…
Hi
With the appliance un plugged I would be removing front plinth to gain access to ribbed translucent hose that goes from pressure unit on l/h side to the sump.
When found, remove and clean thoroughly.Report back if no change 😀
Greg
gegsy
ParticipantRe: servis easiwah washing machine
Hi
Its probably safer with door detached from hinge first, rather than fighting with it in situ 8)Greg
gegsy
ParticipantRe: Miele W863 “rinse light flashing”
Hi
Havent got that info to hand but looking at the WS5425 service manual you may be looking at a motor fault eg brushes,drive etcGreg
gegsy
ParticipantRe: UK Whitegoods September 2006
andy_art_trigg wrote:You wouldn’t say that if I had a beautiful body
Is there something you aren’t telling us Andy 😆 😛
Greg
gegsy
ParticipantRe: UK Whitegoods September 2006
Hi
Cheers Ken 😉Greg
gegsy
ParticipantRe: Bosch SGS45EOGB/56 d/washer
Hi
Please look again at the model as it has a digit missing ie- SGS45E0?GB/56.
Then we can move on with price for module. 😀Greg
gegsy
ParticipantRe: Why do they do that?
cab wrote:LG washers do it for me! how tight are those screws! f…… many a screwdriver and powerdriver bit.
cab
I take it the 4 rear panel ones 😆
Greg
September 14, 2006 at 7:54 pm in reply to: Samsung American Fridge Freezer RS21DCS No water dispensed.. #187876gegsy
ParticipantRe: Samsung American Fridge Freezer RS21DCS No water dispens
Hi
I wouldn’t worry about the water dispenser at the moment.
I would concentrate on the bigger fault of the excess ice around fridge fan manifold.
Its more of a symptom and cause, you sort the manifold fault out (re below) and defrost appliance for 24hrs then all should return to normal.
There is a part change for this panel c/w fan motor unit which they have modified the drain hole to alleviate this fault re occuring 😀Greg
gegsy
ParticipantRe: Bosch SGS45EOGB/56 d/washer
Hi
You may want to check that model number 😉 so we can get a part number for you for module.Greg
gegsy
ParticipantRe: whirlpool commercial top loader
Hi
Part you need is the drive coupling 481932528035 £13.22 list.
Just for the record the appliance is “Heavy Duty” not “Commercial” 😀Greg
gegsy
ParticipantRe: White Knight tumble dryer
winfers wrote:Hi does anyone know where I can get a thermostat for White Knight tumble dryer from. The part is an ELTH T175K. Maplin say its discontinued and RS don’t recognise it at all. 😀 Winfers.
Which thermostat there are 3 😀
Greg
gegsy
ParticipantRe: Bosch KGU 3102GB/54
Hi
This a complex appliance and could be numerous things like – sensors,heaters or pcb, otherwise you may end up ordering spares that you don’t need and before you can blink, you have wasyed loads of cash.
The sensible option would be to find an engineer from the link below OR decide 7 years ain’t bad and replace it 😕 So many choices 😀Greg
gegsy
ParticipantRe: whirpool washer/ dryer 1200
Hi
Unplug appliance if you are going to investigate further :plug:Greg
September 13, 2006 at 11:09 pm in reply to: Bosch SGS66A02GB – won’t work following power cut! #188435gegsy
ParticipantRe: Bosch SGS66A02GB – won’t work following power cut!
Hi reave
The number you have given is correct, however, after it there will be /??.
The ? denotes a digit, this is critical to correctly identify your model.Greg
-
AuthorPosts
