Forum Replies Created
-
Posts
-
Re: dishwasher whirlpool G2P DW1 another error 4 flashes
gegsy wrote:
If its draining ok, try checking the water indicator unit in sump (roundish unit).Re: dishwasher whirlpool G2P DW1 another error 4 flashes
Sounds like that WI unit. Check that out first.
Greg
Re: diplomat ahy44**
eng14 wrote:dave i like your prognosis.i took this mod no from user manual,any idea what p/nos hinges and sel are likely to be,thanks richard.
Yes when you supply the full model number off the appliance like Dave has requested 😉
Greg
Re: Hotpoint Washer
Hi Tom
MayI refer you to http://www.ukwhitegoods.co.uk/modules.p … pic&t=4359Greg
Re: dishwasher whirlpool G2P DW1 another error 4 flashes
Hi
If its draining ok, try checking the water indicator unit in sump (roundish unit). Take filters out and look inside recess, usually 3 o’clock position. Make sure its mesh isnt blocked up but don’t poke anything sharp in there as it will damage unit.Unplug appliance before investigating further.
Greg
Re: zanussi door wont lock
Yea think you right there.
Nigel, can you post up all the numbers after the model number off the rating plate so we can assist you further?
Greg
Re: whirlpool generation 2000 g2p dwi/1 wh
If you need part try the link below Im sure Dave can sort for you 😉
Greg
Re: whirlpool generation 2000 g2p dwi/1 wh
You looking around the £20 – £25 mark.
P/No – 481228268035
Don’t forget unplug appliance before attempting any repair. :plug:Greg
Re: whirlpool generation 2000 g2p dwi/1 wh
leonmelhuish wrote: the error light is a steady flashing light and beeping also.
😕 Steady flashing ❓
How many times does it flash ❓
Greg
Re: Whirlpool adg7540 dishwasher cold water only
Hi Butch
With the appliance unplugged you will need multimeter to check resistence of heater to confirm its failure.
As for diagrams may I refer you to top of this forum namely…Professional Advice in the Public ForumsPenguin45 wrote:Advice in Public Forums.
8/ Please do not ask for wiring diagrams, schematics or for us to sort out any wiring problems over the internet. We cannot judge how competent you are nor the future readers of any thread, we’ll try to point you in the right direction but that’s as far as we can legally go.
Regards
Greg
Re: Tower pressure cooker seal
Hi Jim
Connect have one showing that will fit
P/no – RUSR201704 @ £3.12Greg
Re: Bosch HBN 410A Oven – Fan not working
It does sound like fan motor as boro said in that case.
Greg
