Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: White Knight blower fan
iadom wrote:Is the small round clip used on this fan available as a spare ?
421307571162 😉
Greg
gegsy
ParticipantRe: Hoover w/m HSPF157-80
Cheers Martin 😉
Greg
gegsy
ParticipantRe: Light inside siemans fridge freezer
Yea, it most possibly slides into fascia. Remove fascia and slide old one out and re-connect and push in new one 😀
Power off first of course 😉Greg
gegsy
ParticipantRe: Where in the world……..?
Level 3 18640 :rolls:
gegsy
ParticipantRe: Siemens Extraklasse XL1200
Safety first repair second, thats the motto on here 😀
Greg
gegsy
ParticipantRe: BOSCH CLASSIXX 1000 EXPRESS query
Small hole 😕 May take time for leak to seep forward :con:
Greg
gegsy
ParticipantRe: BOSCH CLASSIXX 1000 EXPRESS query
I would be looking for a small hole in the door seal.
The highest water level is towards the end which may indicate that the hole is not low down as in the wash water levels 😕Greg
gegsy
ParticipantRe: Siemens Extraklasse XL1200
………and with the appliance unplugged first aswell :plug:
See if its in 5 year cover first 😉Greg
gegsy
ParticipantRe: BOSCH CLASSIXX 1000 EXPRESS query
Hi
It will be on the door inner when you open it or failing that its will be on the rear of the appliance 😉
It will start WFxxxxxGB/xx , FDxxxxRegards
Greg 😀
gegsy
ParticipantRe: Light inside siemans fridge freezer
teresagreen wrote:Anything else I can do to “clean it” first?
Not really and TBH its pretty in expensive 😉
Taking the model as KGV3104GB/01 as thats the nearest I can come up with, the light switch is 067747 app £8 Plus the usual.
A click to shop@ on the left hand side will get you sorted.Greg
gegsy
ParticipantRe: BOSCH CLASSIXX 1000 EXPRESS query
Model number would be a start 😉
Greg
gegsy
ParticipantRe: Bosch Classixx not filling with water
I would look at the usual suspect, the transfer tube which runs from the metering unit on lhs, to the sump. Its a clear rigid ribbed pipe app 12″. It is O ringed in both ends. Remove it and clean it thoroughly.
Power off before attempting this :plug:
Greg
gegsy
ParticipantRe: Bosch SGS43A32GB/04
Hi
If you take the filters out and look at the 6 oclock position, there should be a round cover which you remove, then inside the opening there will be a float. Remove the float noting which way round it came out 😉
Clean it and its housing as they tend to chaff and not float smoothly thus sensing water level incorrectly.
If you post the FD up, some of these af certain date IIRC needed a module and safety sensing unit change (mushroom unit in base)Greg
gegsy
ParticipantRe: Access Denied?
Windows 3.11 😀 ❓
Greg
PS- No problems this end either 😉
gegsy
ParticipantRe: Siemens Extraklasse XL1200
Some of the Siemens range have a 5 year guarantee 😉
Greg
-
AuthorPosts
