[Geoff1312]

Re: bosch dishwasher e19

sorry Dave not been there yet trying to be prearmed. all may be revealed soon.

[Geoff1312]

Re: replacing diamond h 33erx22m with ego 5055073010

Hi Dave , many thanks , it’s on a rangemaster grill with pilot and do i need any links? Thanks again .
Geoff.

[Geoff1312]

Re: curry’s essentials cdw60s14 heater

Thanks Kaibart the beko or its equivalent at a third of the price fits perfectly thanks for your advice.( Connections ele9733 )
cheers Geoff 1312.

If it was easy everyone would be doing it,

[Geoff1312]

Re: curry’s essentials cdw60s14 heater

Many thanks Kaibart looks the same and certainly a lot cheaper but is it the same diameter?

[Geoff1312]

Re: bosch wkd28351gb/06 flashing icon.

Thanks for your help guys great to be able to tell a customer it’s their fault sometimes.

If it was easy everyone would be doing it !!!

[Geoff1312]

Re: bosch wkd28351gb/06 flashing icon.

Thankyou very much , I must admit I didn’t see it in the manual.
If it was easy everyone would be doing it!!!
Regards Geoff.

[Geoff1312]

Re: baumatic 1216w e61

Hi Guys. Called to above machine today still unable to identify maker but soon as i put it on spin crackling noise from motor and on removal brushes were worn out , fortunately they were the same as the indesit reddy brown ones which i carry , happy days. If it was easy everyone would do it.
geoff.

[Geoff1312]

Re: baumatic 1216w e61

thanks Dave connections recognise mod. BWM1216W but no pictures of parts so can’t identify machine haven’t seen it yet and info is via letting agent will have to go in cold fingers crossed for divine guidance. From the address i doubt it is integrated . If it was easy everyone would do it cheers mate.
Geoff.

[Geoff1312]

Re: beko cda565fw .

Many thanks Kwatt fitted evap sensor as per bulletin and according to tennant all ok thanks again for your help. Geoff 1312.

[Geoff1312]

Re: Miele WT2670 water in drum after dry cycle

i had problems with a miele not draining intermittently there is an air bleed hose which comes from the pump to the dispenser it was blocked so got air locks in pump and it wouldn’t drain worth a look may have to remove side panel good luck.
geoff.

[Geoff1312]

Re: beko cda565fw .

Many thanks Kwatt this is just what i wanted can quote on job now and hopefully this will do the trick thanks again Geoff , will confirm success as i’m sure it will be.

[Geoff1312]

Re: beko cda565fw .

Hi Dave could the sensor be what they call thermal insurance ?
Geoff S,D.A.S.

[Geoff1312]

Re: beko cda565fw .

Thanks Dave but the only sensor i could see had its cable running through the insulation so difficult to change and i couldn’t see one on connections or qualtex . Thanks again for your reply i’ll keep digging . Regards Geoff. S.D.A.S. Berkshire.

[Geoff1312]

Re: Beko wm5100

Hi I am having the same problem as the original poster. Any chance you could send me the information?

Thanks in advance
Geoff

[Geoff1312]

Re: Hotpoint DI450 Module

Hi,

Yes it is indesit, sorry my mistake. Just one more question. When i put C00255860 in connections it tells me no longer available use C00259736, will this module work for all models regardless of serial number?

Thanks for all your help
Geoff

[Author]

Posts