Forum Replies Created
-
Posts
-
Re: Bosch, Tricity Bendix orZanussi.
kwatt wrote:Not all robots are equal
I thought as much 😕
kwatt wrote:…not all Quality Control Departments are either. 😉
If they have one at all!
Re: Bosch, Tricity Bendix orZanussi.
No, they’re made in the EU 😉 That could be Turkey, Solvakia, Portugal; I’m not sure about that particualr model 😕
But they’re all designed in Germany! That’s the important bit, as machines are built by robots these days.
Re: Thermal Cut Outs on TDC62 (P/N 1701583) – new pair knack
robindunne wrote:Any idea if I am doing anything wrong??
:eeek:
I sounds like it’s time to call in the professionals. Something is seriously wrong! But it could be allsorts 🙁
Re: Bosch/Siemens Washers
royo wrote:I understand that Bosch & Siemens washers are basically the same…
Ahh, no! 😛
If you buy a cheap Bosch…
http://www.ukwhitegoods.co.uk/modules.p … ic&t=12835
…you’ll get a piece of crud with a BSH sticker on it 😕 However, if you are buying the (very) expensive Bosch, then they are similar to the Siemens, but don’t come with 5/10 year guarantees, like the Siemens do 🙄
Swings + roundabouts?
Re: Buying a new washing machine
If your just washing once a week, a machine that cheap will last you a while 🙄
To get an acceptable level of quality, you need to spend over £300!
“To get what you pay for!” is very true when it comes to domestic applainces.
Re: Bosch WTA4408 – Not heating
Birds wrote:…using an ohm meter the element (disconnected) does not give a reading – so I assume this has gone.
Ahh…Sorry, I read this too quick and thought that you meant the reset stat 🙄
I could tell you price for the element, but I need to check that you are sat down first 🙁
Re: “Off topic” Unusual names of members
Goatboy comes from the infamous Bill Hicks performance. Those who know, give me a smile and tell me how funny that performance is. Those that don’t, need an explanation.
I’ll try and post a link 😉
Re: Morphy Richards Ecovac 1600
These vacs are extremely hard to get spares for, as it’s a Chinese vacuum 😕
I spoke to the countries biggest spares supplier about getting parts for these vacuums 2 weeks ago. They said that only 6 different spare part are available 🙁
I think the exteral hose was available, but the interal hose (little one on the bottom that I needed) was not!
Re: Indesit WDG985W
IME it’s probably more like the dryer motor that’s collapsed 🙁
But it’s available as a spare, of course.
Unplug the machine before investigating!
Re: Heavy duty upright vacuum cleaner recommendations
rungidung wrote:When you say the Sebo’s are expensive how expensive eg more than the Kirby?
The last Sebo I got was £250.
I’m not sure about the Oreck.
Because of the location of my shop, I only tend to cruddy little things for £50 – £75 🙁
Re: Heavy duty upright vacuum cleaner recommendations
The Sebo are very good (and expensive 😕 ) vacuums. Especially for commerical situations.
I’d also recommend an Oreck, though these don’t come with the attachments, but they are very light-weight.
HTH
Re: Questions
I’ve just demonstated my first Ise (blind), and I came back with a few technical questions, that the customer asked me, and I buffed my way though 😕
1. Does the spin reach 1500 revs on the spin only program?
and 2. What is the spin speed on the synthetics program?
As it is 5 ‘o clock on a Friday, there no hurry for the answers whatsoeva!
Ps. Goatboy Senior just installed his first one too, and he said he was impressed 😀 😀 😀
