Forum Replies Created
-
Posts
-
Re: Zanussi sc5412 oven not working
Cheers Martin, I’ll try those next, not easy to do, cooker is 20 miles away 😀 I took elements out to take them home and test as I was at inlaws last night when the spoke of the oven not working and they don’t have a multimeter, ah well, looks like they getting another visit tonight from their daughter and favourite SIL (aye right! 😀 )
Cheers guys, found out the fault was in the cable even though there was no apparent damage, tried the the usual place at the plug, wasn’t that so just replaced whole cable
Re: Belling SGE12x
Cheers Phidom,
at the smallest it is around 3 mm and the largest around 5mm so I’ll order some new brushes and see how it goes,
thanks again
forgot to ask, is it safe to use in the meantime IE: I wont do any damage using it while the brushes are worn?
Re: Belling IDW 603
Cheers Peguin,
unfortunately uk whitegoods say the can’t get the suppressor you quoted and that it must be discontinued, but that I could fit one similair, I will try and get a up to date no. from belling
Re: Belling integrated Washer/Dryer SGE 12 X
I Jumped to the wrong conclusion, it’s not the washing machine that’s tripping the RCD, it’s the flamin dishwasher (in my defence I didn’t know it was on, still feel dumb about it though) the dishwasher is a belling IDW 603 and as I say there was a bang and every time I switch it on the RCD in the main fuse box trips, I think it’s the main suppressor, a smal white circular plastic tube type thing that is quite black on the bottom with the bottom tube bit slightly blown out, would I be right on this? I’ll also do a seperate post in the dishwasher forum
Re: Belling integrated Washer/Dryer SGE 12 X
Cheers Phidom,
to give the machine it’s due, this is the 1st major problem we’ve had from it in just over 5 years
Re: Belling IDW603 stops shortly into the cycle (updated)
I managed to get it going again, for any of you that get the same problem, heres how I did it, I took out the motor, took it apart and cleaned the coil/magneto (is this what it’s called,the inside spindle that turns the pump?) cleaned the surfaces in the inside and also cleaned out the pump, seems to be working okay now, will it last? don’t know only time will tell, if it breaks down again I will let you know.
