Forum Replies Created
-
Posts
-
Our Neff oven does exactly the same, quite nice at this time of year but a bit warm in summer.:)
Didn’t happen with ovens years ago but modern ovens have a lot of sensitive electronics at the front which need to be kept safe from overheating.
Have the bearings gone or has it burnt out? If burnt out it would need a new relay or the old one opening up carefully and the contacts cleaning. The pulleys, stators etc can be interchanged so its possible to make a spin motor out of a wash motor and vice versa.
This is a screen grab from the manual.
I can send you the full manual if you like, PM me your email address if you want it.
Jim.Years ago I was under the impression his cheapo machines came from Italy, never knew they came from Holland originally.
That info was from the user manual, if you let me have an email address I can send you a pdf of the full manual if you can’t find that info in yours Send me a private message. Off for a game of squash now, will catch up later.
For a W1606.
Automatic door opening
The machine comes with an automatic door
opening function, which means that the door
opens automatically once the programme has
finished.
If you wish to prevent small children or pets
from climbing into the machine, you can deactivate
the automatic door opening function.
1. Turn off the machine using the main power
switch.
2. Press the Door Open button while simultaneously
pressing the main power switch.
Release the buttons.
3. Press the Key button and the red field goes
out. Automatic door opening is now deactivated.
4. Press the Start/Stop button to store the
setting.
If you want to reactivate the function, follow
the instructions above. When you press the
button with the key symbol (point 3), the red
fields light up. Store the setting by pressing
the Start/stop button.Yes, just checked and those instructions are for W1607 sorry, give a me few minutes and I will see what I can find. I’m guessing you can’t find your instruction manual?
Do you still have your user manual? I think it is on page #18 that refers to door settings.
Turn OFF the machine using the main power switch.
Press and hold the SUPER RINSE button then switch on.
AdO is shown if set to auto open, AdF is shown if auto open is not activated. Press the SUPER RINSE button to change the setting.
Press the DOOR OPENING button to save the setting.machitupanka needs blitzing Ken, just deleted two massive posts, one all in Spanish as well one spamming offering fake passwords. 🙁
What is an invent?????
Does it stop filling instantly as soon as you remove the mains power.
PS a full model and serial number would help. 😉
