[ian07]

Thank you all for your help, I’ll let you know how I get on.

Regards
Ian

[ian07]

electrofix wrote:could easily be

what is the full Enr number ?

Dave

Hi,
Its : WAQ24460GB/01. FD9103 00044

Cheers
Ian

[ian07]

Hi,
OK I think the pump (bearings) might have gone. I’ve checked the drain hose & all seems OK.
I’ve un done it from the waste pipe & put it in a large saucepan,while in the pan it empties really well, but if i left it up (to worktop height) then it struggles & not much happens (apert from a noise that sounds like its struggling)
I could record a quick video it thats needed.

Cheers
Ian

[ian07]

I’ll check the drain hose tonight when I get in.
I think it’s about 8-9yrs old

Thanks again

Ian

[ian07]

electrofix wrote:but does it drain quick enough ?

Dave

Hi,
When it does actually drain it seems fine, when its not it sounds like a muted grumble/moan (hard to describe)

Cheers
Ian

[ian07]

Re: Liebherr Freezer Problem

Hi,
I’m still having issues with this FF & need to find a local engineer to come & have a look. Can anyone point me in the direction of one rather than just pot luck from Yellowpages etc

Cheers

[ian07]

Re: Liebherr Freezer Problem

Hi John,
1) The frost seems to be in the upper 1/2 (maybe 1/3) more towards the centre.
2) My wife has been in today & has said it has been running continuously all day.
3) I’m not sure how to check the gas for a leak

I hope this helps

Ian

[ian07]

Re: Hotpoint wm52

Hi,back again
Ok all fixed now by the look of it,after removing the cointrap/filter i removed a 5p,10p,20p,a button & some blue fabric stuff.
Drains fine now

Thanks again to a great forum

Ian

[ian07]

Re: Hotpoint wm52

Hi,yeah the pump is running as far as i can tell,i will have to take that ‘T’ hose off,not checked that yet.

Cheers,i will report back on what i find

[ian07]

Re: Hotpoint – Iced Diamond

Ok Cheers,sounds like a new unit then as it is about 7-8yrs old & probably not worth spending on

Liebherr will be my 1st choice i think

Cheers again

Ian

[ian07]

Re: Hotpoint – Iced Diamond

Hi its me again,
Ok i have defrosted the fridge/freezer,and now plugged back in & switched on.
It started making the right sort of noises & i left it on over night.This morning the freezer seems cool not cold/frozen

Is this a thermostat problem or a dead unit?

Cheers

Ian

[ian07]

Re: Belling Oven

Thanks for that Penguin45,i have been intouch with the shop but they tell me they are NLA,i have sourced some off another website,hopefully they will come ok.

Thanks again for all your time & help

Regards

Ian

[ian07]

Re: Belling Oven

Hi again,i have managed to have a look at the oven.I cant find a model number on it anywhere.
I have been to a local supplier who says its a very old Belling & cant get me a replacement.

Below is a picture of what it looks like

On the bracket it says ‘RED 6 32 240V 1125W 214105’

[ian07]

Re: Belling Oven

I will take a look today, thanks Clive

Ian

[Author]

Posts