Forum Replies Created
-
Posts
-
Re: Door Hinge / Spring Problems, Whirlpool DW621/2BR
The usual part to go on these is the plastic connector between the hinge and the spring, part has been obsolete for a few years now.
John
Re: FISHER&PAYKEL Model: DD603FFANDCUF f1 both drawers
It has water in the base, dry it out and run a program then look for leaks.
Most of these faults are caused by the customer…..
johnRe: temperature probe
On the fluke it will give an average temp so I just open the door point it at the bottom, both sides and the back to get a reading, I also have a Metrahit 16i with a PTC probe and when I have used both the difference in the readings in negligible.
John
Re: temperature probe
If you fancy an infrared one I just bought a couple of these
http://www.jmwlimited.co.uk/Fluke_62_In … meter.html
I have been comparing them against my wired probes and they are spot on for accuracy.
John
Re: Our Adrian
Looks like Ade doesn’t need the WTA or DASA I just received a spam email to join FME and this is part of it
TalkAppliance! FindMyEngineer.co.uk are pleased to be featured on TalkAppliance.co.uk.
TalkAppliance.co.uk is a free to use Consumer help and Forum site that is growing daily. Not only that, TalkAppliance has a ‘Trade Only’ area so engineers can talk, swap technical information and benefit from a new community!John
Re: In search of the fourth cord
Logged in this morning and had a quiet chuckle reading this one.
washing-machine-forum/samsung-wf0804w8e-bubble-wash-machine-problem-t71691.html
Anyone on here got a meter to test for low bubbles :rotfl:
John
Re: Spam
Looks like he is a schizophrenic to me, both of them posting from the same IP address.
John
Re: Whirlpool 3LSC8255EQ1 Motor
Hi Barry,
I cannot find your exact model number but have found model 3LSC8255 and the motor for this is 481936158117
IIRC it is the same motor in all the US top loaders.HTH
JohnRe: one for all the super smart sparkies on here
AMS wrote:So what are you going to do then John?
simple, nothing….
Both these appliances are fitted to boats that are due to be shipped to an agent in the USA in the next couple of months. Parts for these will not be available for months in the UK so the easiest way to solve it is for the agent in the USA to get the local F&P guys out who should have stock of the main controllers.
two jobs closed and completed 😀
John
Re: one for all the super smart sparkies on here
The appliances are the correct ones as the boats are being shipped to the USA, I Looked at these this morning and they had been tested on a big generator, it was set for 60hz but it looks like the voltage was at 220v. Both dishwashers have blown control boards.
JohnRe: one for all the super smart sparkies on here
Thanks Spimps,
I know the dishwasher is 120v 60hz and the supply is 230v 50hz so I will check out the transformer specs in the morning.
JohnRe: Cheek Of IT!
The names are made up by whoever owns the site, I saw a few posts on there and they were posts from P45, myself and martin that had new user names attached.
I did not see a single post where he has left the original username on it.
John
Re: Rangemaster 1110
eng14 wrote: just want to get some idea where to look first:?:
Below customers sink for oven cleaner :rotfl:
John
Re: Card Payment facility incl terminal
cornwell40 wrote:The terminal is failing 8/10 times and is costing money in telephone referrals for authorisation. This is after finding out how to change the network. Think I’ll call them tomorrow 😥 Tony
Hi Tony,
Had the same problems with both my terminals, one they sorted with a software update but the other is getting swapped over as I probably get one successful transaction in 10
John
