Forum Replies Created
-
Posts
-
Re: daewoo side by side
did you get a resolve as I have the same issue with a customer saying cold at bottom with icing forcing the back plate away and warmer at the top of the freezer, hoping a 48hr defrost will ease things untill I can get more info as we don’t do a lot of refrigeration.
cheers JohnnyboyRe: De Dietrich DVH640JU1 DISHWASHER
To be honest I cant remember, if its the one I think I didnt get a resolve. Sorry I couldnt be of any help but they all seem to mere into one giant dishwasher after a while.
Re: Siemens WK14D320GB/01 washer drier E13
Cheers Guys, going back again tomorrow. I shall check the heater as its cheaper than a module.
Re: mtd07sciia maytag tumble dryer belt change
done by putting nthe machine on its front and getting it from the back.
Re: Siemens Touch Hob ET76S502E/01 not induction
There was a wiring kit supplied as a modification, but worth a shout cheers.
Re: AEG Electrolux E9 cooker fault D98000VF 948522155 Cerami
connections are all where they came off from as far as I see, E9 fault still there so ordering new board in case its faulty, E8 before board change E9 after.Cheers Johnnyboy
Re: Bosch sms63e09gb/07 heat pump replacment 09 fault
seemed too easy, will wait till monday when the office get a call for it flooding. Cheers Johnnyboy
Re: Tricity Bendix tm310 condenser dryer
Ihave one the same, was it the timer? replaced the switch but no difference.
Cheers JohnnyboyRe: bosch lower spray arm
So am I correct in thinking that it is not unusual for a board to blow when a new heater is fitted?
Re: bosch lower spray arm
Anyway I changed the heater box assembled all ok fitted the machine back into position switched it on and BANG, pcb blown Shit,,,,,,,,
Re: bosch lower spray arm
I took the arm off and no water came up through it ,plenty on the top one though. going to it tomorrow 07:30 nice one to start with.
