Forum Replies Created
-
Posts
-
Thanks Dave,
I did search the forum prior to posting and saw that info’… so will return and investigate further.ta,
jonty
Returned to inspect further, and nasty burning obvious at board & drain pump small multi-plug.
Thanks,
jonty
Good evening Dave,
No, I’ve not checked the pump triac.
Do you mean the one in the electronic control module?
jontyGood evening Dave & Jim,
Update on dryer: carried out diagnostic test procedure, and the only error code present was E32 which is incurred during such procedure.
The customer has agreed to monitor the dryer, and to allow more time for drying as she expected much faster drying results.
Thanks again for your assistance,jonty
p.s. I’m aware of the interlock mechanism, which wasn’t disturbed although the unit was turned upside down to renew the drive belt.
Re: AEG 50870M (911916619/02) D/W i10 Problem
Blew out pressure switch vacuum lines, all fine now.
Kind regards,Jon
Re: Beko DV555W (5023790012935) Hobs Tripping
Thanks again Dave,
Heat gun applied to hotplates in question, and all sorted.
jontyRe: Beko DV555W (5023790012935) Hobs Tripping
Good evening Dave,
Have confirmed that the hobs have been washed, but not steam cleaned, and I think all the faulty one’s have become so together.
So, seems like a moisture issue.
Will return to customers’ and update you.
Many thanks,jonty
Re: AEG 320F-DGB/611251911 Cooker Problem
Thanks Aqualectric,
Will do, and update you.
Kind regards,jonty
Re: Zanussi ZWF14380G (91452267600) Reverting to 1 minute
Good evening Dave,
No error codes evident, and customer also states none.
Perhaps there is a diagnostic mode that I need to be interrogating?
jontyRe: Zanussi Lindo 300 W/M Test Cycle & Pressure Switch Testi
Thank you Dave,
Will update you when I can.
Re: Hoover DMCD1013BC-80 Tumble Dryer Wiring Diagram
Thank you kai,
One of the heater TOC’s has blown, possibly due to a clogged condenser and it appears that they are only available with a new heater unit!
jonty
