[jontymox]

Re: Hoover DMCD1013BC-80 Tumble Dryer Error E15

Thanks kai,

Will provide customer with renewal quote.

Regards,

jonty

[jontymox]

Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer

Good evening Kai, everyone,

Returned today, and carried out further tests and confirmed that the pcb/board is faulty.

Customer then confirmed that he bought the replacement board second hand, and he is planning on sending it somewhere for test and repair!

jonty

[jontymox]

Re: Candy GOC58F-80 (3110036312371239) Tumble Dryer

Thank you Kai,

Will re-visit early next and let you know how it goes.

Thanks again,

jonty

[jontymox]

Re: Bosch WVF2402GB/02 Condenser Tank to Outer Tub Hose

Ha, ha,

I managed to nick the new hose’s inner lip on the tub radius when fitting the new, modified plastic collar, and don’t wish a repeat; hence this query.

Have found that the above collar is a difficult and tight fit, (even with fairy liquid) so will de-burr the tub and try again with a little more fairy liquid, although I realise other lubricants are also available.

Kind regards

Jon

[jontymox]

Re: Bosch WVF2402GB/02 Condenser Tank to Outer Tub Hose

If that is the best an “Appliance Master” can come up with, perhaps he shouldn’t comment?

Jon

[jontymox]

Re: Zanussi FL-881 (914789090) Fast Spin Problem

Good morning Steve,

Re-visited yesterday, and did the checks you mentioned.

The pulley action etc is fine, and the customer doesn’t wish to spend a large amount on a new motor.

Thanks again for your help.

Jon

[jontymox]

Re: Zanussi FL-881 (914789090) Fast Spin Problem

Good morning Steve,

Thank you very much for the information.

Will revisit, and check further.

Kind regards,

Jon

[jontymox]

Re: Siemens SF24T553GB/18 Dishwasher Prob’/s

Wondering if someone has a wiring diagram for this model, which they could send?

[jontymox]

Re: Siemens SF24T553GB/18 Dishwasher Prob’/s

Good evening Martin,

I’ve replaced the flow senor/impeller jug, but the symptoms remain.

Have re-checked the connections, which are fine so still struggling….

[jontymox]

Re: Siemens SF24T553GB/18 Dishwasher Prob’/s

Well, I’ve renewed the flow sensor and after a strange filling operation, (filling together with draining, until settled) the wash pump activated, and a wash cycle was completed.

However, the machine still isn’t happy and during the above quick wash, the above fill problems were repeated.

It appears to remain a fill problem, and the water tap light illuminates at random, although usually remains off.

Any help much appreciated.

jonty

[jontymox]

Re: Siemens SF24T553GB/18 Dishwasher Prob’/s

p.s.

The problem is accompanied by the tap light being illuminated.

I’ve checked and cleaned the drain pump/impeller, and the water hoses aren’t kinked.

[jontymox]

Re: Hotpoint SY10X Oven Timer Dead

Well, I replaced the suspect new timer, and all was well. (Clock & all oven functions fine.)

However, upon fitting timer permanently it was found to be “dead” again!

Have re-ordered, and hoping for third time lucky……

jonty

[jontymox]

Re: Hotpoint SY10X Oven Timer Dead

Have ordered a replacement timer, as TOC fine and power reaching unit.

Update in a day or two.

jonty

[jontymox]

Re: Hotpoint SY10X Oven Timer Dead

Thanks Steve,

Yes, that certainly helps… will test and let you know early next week.

Regards,

Jon

[jontymox]

Re: Hotpoint SY10X Oven Timer Dead

Need to bring unit back to workshop, and wonder if there is a safe way of powering up the timer with the correct voltage?

I cannot fathom why the timer is dead…

[Author]

Posts