[LONGBOAT]

Electrolux probs.

Have e/lux washer/dryer EWX14540W which when on the hot washes stops completely with the door able to open. No fault code is displayed and it can take many hours to be able to be operated again. Is there some sort of thermal cut out on this machine?

[LONGBOAT]

Re: BOSCH F21

OK, thanks for your reply. Have to break news to desperate housewife now!

[LONGBOAT]

Re: BOSCH F21

HI Kev, no luck with the removal of motor plug before re setting. Just the same flashing f21. This is 2nd one of these I’ve had in a couple of months only previously I was lucky enough to be able to fit a module I had from a scrap machine to get machine working.Is this an issue now with the later Bosch machines?

[LONGBOAT]

Re: BOSCH F21

Thank you, will try later.

[LONGBOAT]

Re: AEG DOOR PROBS

Thanks Seamy for the reply. Is there a tension adjuster on the latch mechanism?

[LONGBOAT]

Re: BEKO No go

Thanks ever so much. You were spot on. Simples!

[LONGBOAT]

Re: BALLACK WASHING MACHINE

Thanks Penguin. Only JTM I can find is a cleaning company in Leeds that sell industrial Miele machines. Is that the one?

[LONGBOAT]

Re: Electrolux washer dryer overfill.

Many apologies for delay in thanking you for the reply to my problem. It turned out to be self inflicted of course. I had removed the heater to see if I could get to the bra wire and on refitting put the heater lead that has a double connector back on the terminal but with the empty (no wire) side. So effectively had o/c heater. Interesting how a modern machine reacts though. In my day they would have just washed forever if heater gone. Thanks once again.

[LONGBOAT]

Re: configuring

Thanks for the replies. I will get back to my supplier. My heart is getting heavier as my wallet is getting lighter!

[Author]

Posts