[machineman]

thanks Cab

[machineman]

does bottom oven sensor pack up or is it more commonly the wiring.m

[machineman]

there is a drive block bettween motor and g/box they snap.m

[machineman]

out of balance with a small load ,check if it does it with no clothes in .m

[machineman]

Not the comp it runs normally on fast freeze,M

[machineman]

called today switched off then back on dispay ok set for -18 and 5 cust said she had to keep f/f switch on to keep freezing .the little triangle is a warning light when temp to high. works for about 20 mins alarm goes off little triangle lights up .only centre digits off freezer temp alight fridge digits ok at 5.any ideas welcome and would you still go for display board .M

[machineman]

Do you mean switch the mains off for 5 secs,and whats with the triangle.m

[machineman]

cheers Dave we put this on a quick wash soap disp opened but no feed to heater.m

[machineman]

cheers thanks for that i will order main board.M

[machineman]

Cheers Chris

[machineman]

it was an insurance job so we changed motor ,door switch and board,we did check for chaffing but found nothing. the thing that worried me was when you do a wm machine and you split open the interlock and you can see a lovely splash mark inside the switch but this one was as clean as a whistle.
ps what does emw charge for a replcement board and are they formatted?m

[machineman]

yeah thats the one took the plug out and the cover but could not get the board out does that get mucky in there.How do you get that out.m

[machineman]

Result / hole in pressure pipe / thanks.m

[machineman]

cant find a black grid in the sump, did find a pcb the cover came of but i could not get the pcb out is this the w ind and if so how does it come out m

[machineman]

cheers ,that will teach me to read instead of browse the replies thanks.m

[Author]

Posts