mackos

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 34 total)
1 2 3
  • Author
    Posts
  • August 22, 2011 at 9:04 pm in reply to: kenwood kdw23a e3 #357296
    mackos
    Participant

    Re: kenwood kdw23a e3

    fixed my one today, it was the capacitor for the motor. Cheers Mack.

    August 21, 2011 at 8:14 pm in reply to: kenwood kdw23a e3 #357290
    mackos
    Participant

    Re: kenwood kdw23a e3

    did you get anywhere with your Kenwood d/w E3 fault as I have to go look at a Kenwood KDW12SL3 tomorrow with a E3 error code.Thanks Mack.

    June 1, 2011 at 5:39 am in reply to: LG WD-80130F WM intermittant starting #352484
    mackos
    Participant

    Re: LG WD-80130F WM intermittant starting

    Yes we do get dampness here the type where the customer has spilt something down the control panel. Thanks for the heads up I will check those switches more thoroughly.Mack.

    February 10, 2011 at 6:05 am in reply to: Whirlpool S20DRBB32-A/G clicking-spluttering – which PCB? #344119
    mackos
    Participant

    Re: Whirlpool S20DRBB32-A/G clicking-spluttering – which PCB

    Hi you could try this site a few people have mentioned it on the net.I haven’t tried it yet.But it might be worth a try.Mack.http://cgi.ebay.co.uk/Whirlpool-Fridge- … 3269QQcate

    January 25, 2011 at 3:45 pm in reply to: HOOVER HCA383 INTER@ct F/F #342498
    mackos
    Participant

    Re: HOOVER HCA383 INTER@ct F/F

    Thanks here’s my email commandermack@hotmail.com

    January 21, 2011 at 4:39 pm in reply to: Haier HU-GDZ5-1 #341833
    mackos
    Participant

    Re: Haier HU-GDZ5-1

    Hi Jackal thanks for trying.Mack.

    January 13, 2011 at 3:26 pm in reply to: Hoover OPH 714D/1-80 #340900
    mackos
    Participant

    Re: Hoover OPH 714D/1-80

    Thanks Martin I’ve already meggered the heater & thats fine,nothing in the pump or pipes & empties in less than 30 secs.does the rapid wash no problem anything longer than that is when it starts playing up & then wont reset off the error until it cools down? Thanks Mack.

    February 21, 2010 at 4:53 pm in reply to: servis d/w m4905 b-i error code #311898
    mackos
    Participant

    Re: servis d/w m4905 b-i error code

    thanks for the reply.it actually doesn’t do anything except go straight into the error message.i have another one of these that needs the control card & seeing that servis have ceased trading i can’t get many parts for this model.thanks Mack.

    January 6, 2010 at 5:39 pm in reply to: Hoover Nextra #307943
    mackos
    Participant

    Re: Hoover Nextra

    thanks for the reply.do most fridges or freezers have the same types of thermistors & if so is a chart resistance/temp available.I’ve downloaded a few from the web but they all seem to have different values.ie at 20C 2.2k 3.3k & 6.2k.can you enlighten me.thanks Mack.

    August 5, 2009 at 3:07 pm in reply to: whirlpool american f/f #293752
    mackos
    Participant

    Re: whirlpool american f/f

    depending on the model it might be the air diffuser which is a motorised baffle situated top right of freezer & top left of fridge.it might be stuck in the open position.good luck.Mack

    August 4, 2009 at 8:10 pm in reply to: siemens d/w overfilling #292997
    mackos
    Participant

    Re: siemens d/w overfilling

    Hi Chris customer brought out flowmeter from Blighty fitted it today.worked a treat.Cheers Mack.

    July 31, 2009 at 2:53 pm in reply to: bosch maxx WFL2050 #293409
    mackos
    Participant

    Re: bosch maxx WFL2050

    Hi Chris I went back & checked the pressure switch that’s fine.Any other suggestions.Thanks Mack.

    July 29, 2009 at 8:53 pm in reply to: bosch maxx WFL2050 #293408
    mackos
    Participant

    Re: bosch maxx WFL2050

    thanks I will have a look tomorrow if I get a chance.Mack

    July 29, 2009 at 7:32 pm in reply to: bosch maxx WFL2050 #293406
    mackos
    Participant

    Re: bosch maxx WFL2050

    thanks Chris I did have a look at the vipler hose & pressurestat if I remember right it did seem to have only one level should it be a two level switch.thanks Mack.

    July 27, 2009 at 3:37 pm in reply to: siemens d/w overfilling #292995
    mackos
    Participant

    Re: siemens d/w overfilling

    Thanks for the reply Chris. I am getting the customer to bring a flow meter out with him.Now not wishing to appear too dumb but presumably the flow meter has an impellor inside & from what I remember didn’t have any wires attached.So how does it work.Mack.

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 34 total)
1 2 3