Forum Replies Created
-
Posts
-
Re: Broken freezer flap
Thanks everyone
A new flap is around £10 from e spares.
Will have to remember to be more gentle 😳
Re: Zanussi ZWF1431W bearing replacement?
😆
I managed to get a bra wire out of our Creda through the heater hole. took a while, a torch a garden cain and a long graby thing. took a while though
Re: Zanussi ZWF1431W bearing replacement?
So you could use that hole to remove something stuck in the drum. Not ideal but posible. Dosnt solve the bearing problems though
Re: Zanussi ZWF1431W bearing replacement?
What about the heater on these sealed tubs. Are they removable
Re: Old Creda needs replacing
And I value the advice. But When I replace the Creda It will be for a machine under £250 and by the looks of it a Beko, if it turns out they have sealed tubs aswell then I might go for anything posably even a Servis 😯 . Unfortunatly When your on a budget you have to go for cheep products and hope for the best or fix them your self if you are able. I would never have got a PC if I couldnt have built it my self, I would never have a car if I couldnt repair & service it my self. We would be without many things if I couldnt bodge and tinker with them. I might even pay £110 for new parts on the Creda and keep it going.
Tell me one thing, Are these tubs compleatly sealed? how is the heater fitted?
Re: Old Creda needs replacing
And I understan and dont expect a Cheep £200-£250 machine to last a lifetime but I and many people cant afford to spend £400 on a machine in the first place, but making a sealed unit is only going to make matters worse.
Re: Sealed tub or not
No the old compact is still going strong used a few times a year to clean the fish pond filters. Its the old Creda W120FW thats on its way out and I dont want a replacemet with a sealed tub. What stupid F@#ker introduced them for gods sake 😡
Re: Old Creda needs replacing
Ok so anything above a 6kg load is a no no then in reality.
However compared to our old machine a 5kg load this one a 5.5kg is miles better. I’m in 2 minds.do I replace the supeshion to stop it banging and fit a new motor to stop the chatering of the bearing rarther than replace the machine? cost would be £110 but then it is about 8 years old and compared to new machines it cant be that economical to run.
Regarding that artical. dose that mean the wash performance ratings on new machines are no good?
