Forum Replies Created
-
Posts
-
Re: Kuppersbusch WT159 Bearings
well am going out to it on Monday so will take a copious amount of bearings and seals which I’m sure I can match, it,s just the seal I may have a prob with. Will let you know how it goes and what if any that match
M
Re: ZAN FJS1025
Yes pretty sure 43mins is start of heating cycle check heater or connector at main board end
MarkRe: Diplomat ADP8322 DW Dead sort of
Apologies for delay I need a flow meter for this appliance have looked on this website but doesn,t seem to be listed. Where can I get one and rough price
Cheers
MarkRe: Hotpoint WF430
looks like lights 2,3 &4 which I think would be the heater relay. I presume this means a new board? Sometimes it works for a couple of washes before it happens again. Any other possibilities?
Mark
Re: Baumatic Range Style Cooker
I’ve had similar before and changed the fan element and had no come backs but ther’s always a chance (slim) that the grill element could be faulty but unlikely. RCD’s these days are extremely sensitive, probably wouldn’t of shown up 20yrs ago
Mark
Re: servis larder fridge
Just a thought, sometimes the capillary gets stuck and doesnt go in far enough to sense the temp correctly. You could always put a universal type stat in and push it in further. I’ve done this before and no come backs. Sorry for the delay in replying
Mark 🙂
Re: servis larder fridge
What type of stat did you use? If it was the electronic type with a circuit board then chances are its a faulty one. If its a mechanical one, with individual wires could be wiring wrong. Apart from that not much else it could be. hope this helps
Mark 🙂Re: Hinari DW02
Just in case you didnt know B&Q are now selling Hinari slimline D/W for £120.
Mark 😮
Re: Kuppersbusch EEBM691 BX-GB oven
Thanks for that. Think I will try all 3 avenues and see what comes up best. I will keep you posted and see what comes up best. 🙂
M
