Forum Replies Created
-
Posts
-
Re: my whirlpool 4502/5 start is flashing
More than likely the pressure switch is stuck and it thinks it has water in the sump – as you look in the sump there is a black mesh – give it a good scrub out with a washing up brush and warm water and try again
Re: Whirlpool ADP5966
It usually flashes the error code then pauses for a sec and then continues the same number of flashes again
Re: whirlpool awo/d 5526 no spin
Is there a possible second wire that has broken but not snapped out of the motor block – or has the block on the pcb got a loose or damaged connection
Re: Bosch Dishwasher banging the water pipes
I take it off fully and give it a good rinse out usually
Re: Diplomat ADP8322 Dishwasher Inlet TubeSpray Arm Assy Rem
Before you go to the trouble of removing this part ensure you don’t need part 480140102074 this is the housing that the spray arms clip in to if you are getting a problem with the feed tube popping out the little clips that hold it in place have probably snapped (a lot easier to replace)
Re: Bosch Dishwasher banging the water pipes
Ensure the pressure chamber is totally clear and the red float does not have any muck build up in it, also the tube between the pressure hose and sump. The reason your getting the sound is that the pressure is building up and activating the overflow. If the metering tank is dirty you might want to take it off and flush it out
