Forum Replies Created
-
Posts
-
Re: Hotpoint hvl 211 washer
fault code gives 1,3and 4 pump draining error checked for blockages and changed pump but fault symptom persists is there a reset procedure ??
Re: Empire Direct Bust!
got a email yesterday to inform me Richer Sounds have purchased the domain name http://www.empiredirect.co.uk so that may cause some fun and confusion with the general public with regard warranties etc .
Re: iNDESIT WIL163 WASHING MACHINE
Got same fault on a WIL163 but had pcb checked by EMW – No fault found and changed NTC but still water fills and drain pumps water out after 1 minute or so ,anybody got any other suggestions ? thanks
Re: BEKO WM1715S
Wiring seemed all ok pulled and tugged at it,cleaned all terminals still no joy.Then see someone on ebay selling selling nearly new motor ,bid on it won it collected it and fitted it, and then the BEKO she goes again success !!
Re: Proline TDV65 Tumble dryer spares
connect quote retail price £43.03 + vat for pulley and £11.89 +vat for belt = total £64.53 :rolls: (allowing us a small profit for handling) before we add any labour on it !! 8O,
Re: Proline TDV65 Tumble dryer spares
thanks for that info, although cost of those spares ( pulley mainly) will probably make it uneconomic to do
Re: Proline TDV65 Tumble dryer spares
yes original belt is 1965 ,but the main part we need is tension pulley as the pulley has partly melted ,seems the belt has snapped and the tension pulley has come into contact with motor and pulley has got a very big groove in it
Re: hotpoint washing machine
we had not seen one like it either but no sign of a pinhole either ,very strange !!
Re: INDESIT WIL103 Time remaining lights
thanks for help and advise on this – much appreciated ,as you say when did a customer look at instructions or can they find them
Re: INDESIT WIL103 Time remaining lights
if they are time delay lights why does it work all functions as soon as you switch on ??
Re: LG WASHER WM-1285FHD
thanks for that , no sign of corrosion but have checked plugs and socket plus cleaned / tightened but no improvement overall ,
seems it may be destined for the scrap heap as cost to replace parts may be too expensiveRe: LG WASHER WM-1285FHD
further to my previous post have tried the machine and does as follows-
connect up and switch on set programme and start – starts to fill and drum starts spinning (with slight screeching noise ) goes approx 2minutes then int. stops ,display shows symptom code LE (overload in motor)
any suggestions would be helpful
