Forum Replies Created
-
Posts
-
Re: candy washer spares
thanks for info looks like i need the timer shaft extension 41028257 as i have a knob 41018426 of another machine and thought it should have fitted but missing the extension shaft (spent a hour this morning trying to find the right part from various websites to no avail ) thanks again
Re: CANDY EVO1682D /1-80 Washer noisy
yes sce checked for any movement on the drum bearings and drum spider but this seemed rock solid no movement at all ,will have to have a look at the front weight as the top one was ok when machine was checked thanks for advice
Re: CANDY EVO1682D /1-80 Washer noisy
Busted spigot ! explain ? yes its a sealed drum of course 18 month old max, what do candy charge for call out / labour if it does have free spares does anybody know thanks
Re: Hotpoint wf321 model code 31167r
Yes the thread is easy to find but the model search isnt .and i can be bothered to look and i take offence at the inferred remark !!
Re: Hotpoint wf321 model code 31167r
If this site was easier to navigate to the error codes listing i would have looked but as it is !! yes think this machine has been a “cut and shut job” door sticker says wf000 and it has split drum with 30mm bearings but front facia is wf321 !
Re: hotpoint wma30 test ?
Replaced the door lock and replaced pcb with another known good one and still comes up with same error code as before !! ,machine will wash but won’t go into spin mode have changed the brushes (old ones were worn ) but still won’t spin fast any further suggestions anyone ?
Re: HOTPOINT CTD85A Condenser dryer display
Do you have the hotpoint part number for the display ?? thanks
Re: Inmans
Surprised Inmans lasted this long really,we used to deal with them about 10 years ago when they bought the trade cusomer accounts list of E. Mcgarry from Blackburn (good electrical wholesaler) but Inmans had poor stock levels even then and often advertised monthly specials that they did’nt have or had under ordered to meet demand .Inmans were a waste of time really so we ditched them as an account, but how many more wholesalers will go under if you think back 10 or 20 years there was lots but most have fallen by the wayside but then so have electrical retailers big and small sad really but that’s life !!
Re: Multi function MX600SS built in oven element required
Yes we found it is a cda 2.12efs004130 but it’s not listed on the ukwhitegoods store
Re: Multi function MX600SS built in oven element required
Yes but none looked that similair to the faulty one we have
Re: Hotpoint WML520P
Yes correct diagnosis Tim ,fault was down to one water inlet valve not working all back in action now
Re: Indesit WIXL133 int door lock indicator /off
Fault located to dry joint(s) on on/off switch contacts on front pcb ,connections looked ok but once resoldered and machine ran over several days fault cleared
Re: search facility
If you have trouble being asked to log on continuously try switching to google chrome ,i did this and now seem to be able to jump much easier from page to page without being constantly asked to to log on each time .
Re: search facility
aol yes are a***holes on line but it only does it on here since you’ve changed your website and no problems or mayhem on any other site !!
